Bonjour à tous,
J'ai migré mon wapt windows il y a deux semaines , tout fonctionnait très bien , jusqu'à la fin de la semaine dernière.
Je me suis rendu compte que tous les postes apparaissaient dans la console , mais avec aucun paquet attribué.
Si je tente de leur attribuer un paquet ou un groupe , il s'ajoute bien en dépendance dans la configuration du poste.
Mais quand on actualise , il n'y a uniquement le paquet uuid qui apparaît comme étant manquant , puis disparaît au bout de quelques secondes.
Si on se met côté client avec le tray d'ouvert , on peut voir passer les deux messages suivants ( Voir PJ )
J'ai tenté une réinstallation du client , rien n'y fait , un changement d'uuid aussi.
Même mon poste serveur / console à ce soucis..
Qui plus est j'ai essayé d'installer la dernière version de wapt , mais TrendMicro Officescan supprime le fichier " waptconsole.exe" avant la post conf... ( voir PJ )
Sans que je puisse y faire quoi que ce soit.
Le serveur n'a pas changé d'ip , d'os , je n'ai pas de dns les clients pointent une ip.
La seule chose que je vois qui aurait pu poser soucis c'est que j'ai monté un serveur de test debian ( autre ip , autre jeu de clé etc ) sur le même réseau ?
Merci d'avance , bonne journée,
Bien cordialement,
Est-ce que tu peut faire un essai depuis le terminal de commande ? Cela permet d'obtenir plus d'information.
outil : cmd
commande : wapt-get update
Peut être est-ce un problème de signature qui n'est pas appliqué sur les paquets machines. Cela m'est arrivé après la migration vers wapt 1.5
Joël LATIEULE - 06.38.02.33.27 / TICE
Collège Victor Hugo - 0110021n 5 boulevard Marcel Sembat, 11100 Narbonne 04.68.90.24.00
Le 03/04/2018 à 11:10, Adrien Balent a écrit :
Bonjour à tous,
J'ai migré mon wapt windows il y a deux semaines , tout fonctionnait très bien , jusqu'à la fin de la semaine dernière.
Je me suis rendu compte que tous les postes apparaissaient dans la console , mais avec aucun paquet attribué.
Si je tente de leur attribuer un paquet ou un groupe , il s'ajoute bien en dépendance dans la configuration du poste.
Mais quand on actualise , il n'y a uniquement le paquet uuid qui apparaît comme étant manquant , puis disparaît au bout de quelques secondes.
Si on se met côté client avec le tray d'ouvert , on peut voir passer les deux messages suivants ( Voir PJ )
J'ai tenté une réinstallation du client , rien n'y fait , un changement d'uuid aussi.
Même mon poste serveur / console à ce soucis..
Qui plus est j'ai essayé d'installer la dernière version de wapt , mais TrendMicro Officescan supprime le fichier " waptconsole.exe" avant la post conf... ( voir PJ )
Sans que je puisse y faire quoi que ce soit.
Le serveur n'a pas changé d'ip , d'os , je n'ai pas de dns les clients pointent une ip.
La seule chose que je vois qui aurait pu poser soucis c'est que j'ai monté un serveur de test debian ( autre ip , autre jeu de clé etc ) sur le même réseau ?
Merci d'avance , bonne journée,
Bien cordialement,
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
Bonjour,
Voici ce que me retourne la commande , à vue d'oeil , c'est un résultat normal.
Update package list Total packages : 53 Added packages :
Removed packages :
Pending operations : upgrade: additional: install: remove: Repositories URL : https://10.66.47.5/wapt https://10.66.47.5/wapt-host
Ce que je comprends pas c'est que tout à bien marché pendant 10-12 jours , j'ai téléchargé des paquets , les machines les ont bien installées.
Et dès que j'ai vu le message du FQDN sur mon poste console/serveur , le problème à l'air de s'être répercuté sur l'ensemble des postes..
J'ai quasiment tout mon parc en ligne en ce moment ( les postes apparaissent bien en vert dans la console ) 7 postes sur 22 ont conservés leur listes de paquets , pour tout le reste la liste est intégralement vide , même pas de paquet uuid.
Merci beaucoup , bonne après midi.
Cordialement,
J'avais pas fait gaffe que tu était le Adrien qui m'avait conseillé wapt en formation tice ;-)
C'est étrange et je ne vois pas quel en serait la cause. Tel quel peut être une machine qui n'est pas correctement enregistrée mais ça n'explique pas pourquoi ça fonctionnait correctement il y a quelques jours.
Fait un essais d'enregistrement d'un poste avec la commande *wapt-get register* mais je doute que cela améliore les choses.
Tu a plus de détail sur les commandes sur https://www.wapt.fr/fr/doc/Utilisation/utilisation_cli/utilisation_cli_speci...
Y a plus qu'à attendre le passage d'une personne plus expérimentée.
Joël LATIEULE - 06.38.02.33.27 / TICE
Collège Victor Hugo - 0110021n 5 boulevard Marcel Sembat, 11100 Narbonne 04.68.90.24.00
Le 03/04/2018 à 14:39, Adrien Balent a écrit :
Bonjour,
Voici ce que me retourne la commande , à vue d'oeil , c'est un résultat normal.
Update package list Total packages : 53 Added packages :
Removed packages :
Pending operations : upgrade: additional: install: remove: Repositories URL : https://10.66.47.5/wapt https://10.66.47.5/wapt-host
Ce que je comprends pas c'est que tout à bien marché pendant 10-12 jours , j'ai téléchargé des paquets , les machines les ont bien installées.
Et dès que j'ai vu le message du FQDN sur mon poste console/serveur , le problème à l'air de s'être répercuté sur l'ensemble des postes..
J'ai quasiment tout mon parc en ligne en ce moment ( les postes apparaissent bien en vert dans la console ) 7 postes sur 22 ont conservés leur listes de paquets , pour tout le reste la liste est intégralement vide , même pas de paquet uuid.
Merci beaucoup , bonne après midi.
Cordialement,
-- Adrien Balent CoTice 66 Collège Jules Verne Le Soler - 04 68 92 17 09 Collège Christian Bourquin Millas - 04 68 84 63 70
Le 03/04/2018 à 14:24, Latieule Joel a écrit :
Est-ce que tu peut faire un essai depuis le terminal de commande ? Cela permet d'obtenir plus d'information.
outil : cmd
commande : wapt-get update
Peut être est-ce un problème de signature qui n'est pas appliqué sur les paquets machines. Cela m'est arrivé après la migration vers wapt 1.5
Joël LATIEULE - 06.38.02.33.27 / TICE
Collège Victor Hugo - 0110021n 5 boulevard Marcel Sembat, 11100 Narbonne 04.68.90.24.00 Le 03/04/2018 à 11:10, Adrien Balent a écrit :
Bonjour à tous,
J'ai migré mon wapt windows il y a deux semaines , tout fonctionnait très bien , jusqu'à la fin de la semaine dernière.
Je me suis rendu compte que tous les postes apparaissaient dans la console , mais avec aucun paquet attribué.
Si je tente de leur attribuer un paquet ou un groupe , il s'ajoute bien en dépendance dans la configuration du poste.
Mais quand on actualise , il n'y a uniquement le paquet uuid qui apparaît comme étant manquant , puis disparaît au bout de quelques secondes.
Si on se met côté client avec le tray d'ouvert , on peut voir passer les deux messages suivants ( Voir PJ )
J'ai tenté une réinstallation du client , rien n'y fait , un changement d'uuid aussi.
Même mon poste serveur / console à ce soucis..
Qui plus est j'ai essayé d'installer la dernière version de wapt , mais TrendMicro Officescan supprime le fichier " waptconsole.exe" avant la post conf... ( voir PJ )
Sans que je puisse y faire quoi que ce soit.
Le serveur n'a pas changé d'ip , d'os , je n'ai pas de dns les clients pointent une ip.
La seule chose que je vois qui aurait pu poser soucis c'est que j'ai monté un serveur de test debian ( autre ip , autre jeu de clé etc ) sur le même réseau ?
Merci d'avance , bonne journée,
Bien cordialement,
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
Bonjour ,
Oui c'est moi ^^
wapt-get register System Power Controls Error when registering host against server https://10.66.47.5: Error on server: 'ascii' codec can't decode byte 0xc3 in position 949: ordinal not in range(128)
Voilà ce que me retourne la commande...
Pour moi c'est l'ajout d'un 2eme wapt sur le réseau , car dans mon deuxième établissement où je n'ai pas fait de test , le 1.5 windows est fonctionnel.
J'ai eu ce bug même avec un serveur test debian en 1.5...
Et ce bug à l'air propre à la 1.5 , car mes 1.3 debian n'ont pas flanché.
Ce que je n'ai pas tenté c'est d'éteindre le 1.3 debian en production. Ce que je vais faire.
Bonne matinée à tous.
Bonjour, Serait-il possible (en message privé) de me transmettre le résultat (c'est à dire le fichier test.json) de la commande wapt-get inventory > test.json
Je pense que sur votre (vos) machines, il y a des informations avec un encoding particulier (non ascii) que le serveur essaye de stocker dans un champ de la base de données sans l'encoder correctement.
Hubert
Le 04/04/2018 à 10:37, Adrien Balent a écrit :
Bonjour ,
Oui c'est moi ^^
wapt-get register System Power Controls Error when registering host against server https://10.66.47.5: Error on server: 'ascii' codec can't decode byte 0xc3 in position 949: ordinal not in range(128)
Voilà ce que me retourne la commande...
Pour moi c'est l'ajout d'un 2eme wapt sur le réseau , car dans mon deuxième établissement où je n'ai pas fait de test , le 1.5 windows est fonctionnel.
J'ai eu ce bug même avec un serveur test debian en 1.5...
Et ce bug à l'air propre à la 1.5 , car mes 1.3 debian n'ont pas flanché.
Ce que je n'ai pas tenté c'est d'éteindre le 1.3 debian en production. Ce que je vais faire.
Bonne matinée à tous.
-- Adrien Balent CoTICE 66 Collège Jules Verne - Le Soler Collège Christian Bourquin - Millas
Le 03/04/2018 à 16:45, Latieule Joel a écrit :
J'avais pas fait gaffe que tu était le Adrien qui m'avait conseillé wapt en formation tice ;-)
C'est étrange et je ne vois pas quel en serait la cause. Tel quel peut être une machine qui n'est pas correctement enregistrée mais ça n'explique pas pourquoi ça fonctionnait correctement il y a quelques jours.
Fait un essais d'enregistrement d'un poste avec la commande *wapt-get register* mais je doute que cela améliore les choses.
Tu a plus de détail sur les commandes sur https://www.wapt.fr/fr/doc/Utilisation/utilisation_cli/utilisation_cli_speci...
Y a plus qu'à attendre le passage d'une personne plus expérimentée.
Joël LATIEULE - 06.38.02.33.27 / TICE
Collège Victor Hugo - 0110021n 5 boulevard Marcel Sembat, 11100 Narbonne 04.68.90.24.00 Le 03/04/2018 à 14:39, Adrien Balent a écrit :
Bonjour,
Voici ce que me retourne la commande , à vue d'oeil , c'est un résultat normal.
Update package list Total packages : 53 Added packages :
Removed packages :
Pending operations : upgrade: additional: install: remove: Repositories URL : https://10.66.47.5/wapt https://10.66.47.5/wapt-host
Ce que je comprends pas c'est que tout à bien marché pendant 10-12 jours , j'ai téléchargé des paquets , les machines les ont bien installées.
Et dès que j'ai vu le message du FQDN sur mon poste console/serveur , le problème à l'air de s'être répercuté sur l'ensemble des postes..
J'ai quasiment tout mon parc en ligne en ce moment ( les postes apparaissent bien en vert dans la console ) 7 postes sur 22 ont conservés leur listes de paquets , pour tout le reste la liste est intégralement vide , même pas de paquet uuid.
Merci beaucoup , bonne après midi.
Cordialement,
-- Adrien Balent CoTice 66 Collège Jules Verne Le Soler - 04 68 92 17 09 Collège Christian Bourquin Millas - 04 68 84 63 70
Le 03/04/2018 à 14:24, Latieule Joel a écrit :
Est-ce que tu peut faire un essai depuis le terminal de commande ? Cela permet d'obtenir plus d'information.
outil : cmd
commande : wapt-get update
Peut être est-ce un problème de signature qui n'est pas appliqué sur les paquets machines. Cela m'est arrivé après la migration vers wapt 1.5
Joël LATIEULE - 06.38.02.33.27 / TICE
Collège Victor Hugo - 0110021n 5 boulevard Marcel Sembat, 11100 Narbonne 04.68.90.24.00 Le 03/04/2018 à 11:10, Adrien Balent a écrit :
Bonjour à tous,
J'ai migré mon wapt windows il y a deux semaines , tout fonctionnait très bien , jusqu'à la fin de la semaine dernière.
Je me suis rendu compte que tous les postes apparaissaient dans la console , mais avec aucun paquet attribué.
Si je tente de leur attribuer un paquet ou un groupe , il s'ajoute bien en dépendance dans la configuration du poste.
Mais quand on actualise , il n'y a uniquement le paquet uuid qui apparaît comme étant manquant , puis disparaît au bout de quelques secondes.
Si on se met côté client avec le tray d'ouvert , on peut voir passer les deux messages suivants ( Voir PJ )
J'ai tenté une réinstallation du client , rien n'y fait , un changement d'uuid aussi.
Même mon poste serveur / console à ce soucis..
Qui plus est j'ai essayé d'installer la dernière version de wapt , mais TrendMicro Officescan supprime le fichier " waptconsole.exe" avant la post conf... ( voir PJ )
Sans que je puisse y faire quoi que ce soit.
Le serveur n'a pas changé d'ip , d'os , je n'ai pas de dns les clients pointent une ip.
La seule chose que je vois qui aurait pu poser soucis c'est que j'ai monté un serveur de test debian ( autre ip , autre jeu de clé etc ) sur le même réseau ?
Merci d'avance , bonne journée,
Bien cordialement,
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt