Bonjour,
Jai un problème depuis quelque temps pour installer les mises à jour dune application (COVADIS)
Ça marche sur la plupart de mes poste mais plante sur 4 ou 5 dentre eux.
Le code (tres basic) :
from setuphelpers import *
uninstallkey = []
def install():
print('installing geo-covpatch64-22.0_000_004')
run(r'msiexec /update "CovPatch64-22.0_000_004.msp" /qn')
jai lerreur :
CalledProcessErrorOutput: Command 'msiexec /update "CovPatch64-22.0_000_004.msp" /qn' returned non-zero exit status 1642.
Par contre si je lexécute dans une invite de commande sur le poste en question , linstallation seffectue sans problème.
Jai cherché ce code derreur mais ça ne mavance pas trop vu que tous mes pc on exactement la même version installé avant la mise à jour.
Si quelquun a une idée je suis preneur :)
Merci dacance.
Durand didier
GEOVAL
Bonjour Didier,
J’ai un problème depuis quelque temps pour installer les mises à jour d’une application (COVADIS)
Ça marche sur la plupart de mes poste mais plante sur 4 ou 5 d’entre eux.
def install(): print('installing geo-covpatch64-22.0_000_004') run(r'msiexec /update "CovPatch64-22.0_000_004.msp" /qn')
j’ai l’erreur :
CalledProcessErrorOutput: Command 'msiexec /update "CovPatch64-22.0_000_004.msp" /qn' returned non-zero exit status 1642.
Par contre si je l’exécute dans une invite de commande sur le poste en question , l’installation s’effectue sans problème.
Est ce que vous avez lancé la ligne de commande en tant qu'utilisateur Administrateur ou LocalSystem? C'est le compte LocalSystem qui est utilisé pour les installations WAPT. Pour passer en LocalSystem, vous installer le paquet tis-ms-pstools, puis vous lancer dans un cmd.exe psexec -i -s cmd msiexec /update "CovPatch64-22.0_000_004.msp" /qn
Il faudrait vérifier si le GUID de l'installeur MSI de la dernière mise à jour n'est pas différent sur les postes en questions (on peut récupérer les GUID en faisant un wapt-get list-registry).
Cordialement,
Denis
J’ai cherché ce code d’erreur mais ça ne m’avance pas trop vu que tous mes pc on exactement la même version installé avant la mise à jour.
Si quelqu’un a une idée je suis preneur :)
Merci d’acance.
Durand didier
GEOVAL
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
Bonjour Merci pour votre réponse. Pour le GUID de l'appli MSI , il semble bien être identique sur les différentes machine. Par contre j'ai testé la commande avec psexec, rien ne se passe quand j'exécute msiexec /update "CovPatch64-22.0_000_004.msp" /qn Je précise que les autres mises à jour logiciels se passe bien sur les PCs concernés. Cordialement Durand didier Geoval
-----Message d'origine----- De : Denis Cardon [mailto:dcardon@tranquil.it] Envoyé : jeudi 18 janvier 2018 11:59 À : Geoval - Durand didier ddurand@geoval.info; wapt@lists.tranquil.it Objet : Re: [Wapt] problème d'installation d'une MAJ avec msiexec
Bonjour Didier,
J’ai un problème depuis quelque temps pour installer les mises à jour d’une application (COVADIS)
Ça marche sur la plupart de mes poste mais plante sur 4 ou 5 d’entre eux.
def install(): print('installing geo-covpatch64-22.0_000_004') run(r'msiexec /update "CovPatch64-22.0_000_004.msp" /qn')
j’ai l’erreur :
CalledProcessErrorOutput: Command 'msiexec /update "CovPatch64-22.0_000_004.msp" /qn' returned non-zero exit status 1642.
Par contre si je l’exécute dans une invite de commande sur le poste en question , l’installation s’effectue sans problème.
Est ce que vous avez lancé la ligne de commande en tant qu'utilisateur Administrateur ou LocalSystem? C'est le compte LocalSystem qui est utilisé pour les installations WAPT. Pour passer en LocalSystem, vous installer le paquet tis-ms-pstools, puis vous lancer dans un cmd.exe psexec -i -s cmd msiexec /update "CovPatch64-22.0_000_004.msp" /qn
Il faudrait vérifier si le GUID de l'installeur MSI de la dernière mise à jour n'est pas différent sur les postes en questions (on peut récupérer les GUID en faisant un wapt-get list-registry).
Cordialement,
Denis
J’ai cherché ce code d’erreur mais ça ne m’avance pas trop vu que tous mes pc on exactement la même version installé avant la mise à jour.
Si quelqu’un a une idée je suis preneur :)
Merci d’acance.
Durand didier
GEOVAL
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
-- Denis Cardon Tranquil IT Systems Les Espaces Jules Verne, bâtiment A 12 avenue Jules Verne 44230 Saint Sébastien sur Loire tel : +33 (0) 2.40.97.57.55 http://www.tranquil-it-systems.fr
Bonjour Didier,
Merci pour votre réponse. Pour le GUID de l'appli MSI , il semble bien être identique sur les différentes machine. Par contre j'ai testé la commande avec psexec, rien ne se passe quand j'exécute msiexec /update "CovPatch64-22.0_000_004.msp" /qn
et si vous enlevez le /qn, ça donne quoi? (avec psexec -i -s, les affichages graphiques devrait être redirigé sur votre buffer standard, donc vous devriez avoir l'affichage d'erreur du msiexec).
Denis
Je précise que les autres mises à jour logiciels se passe bien sur les PCs concernés. Cordialement Durand didier Geoval
-----Message d'origine----- De : Denis Cardon [mailto:dcardon@tranquil.it] Envoyé : jeudi 18 janvier 2018 11:59 À : Geoval - Durand didier ddurand@geoval.info; wapt@lists.tranquil.it Objet : Re: [Wapt] problème d'installation d'une MAJ avec msiexec
Bonjour Didier,
J’ai un problème depuis quelque temps pour installer les mises à jour d’une application (COVADIS)
Ça marche sur la plupart de mes poste mais plante sur 4 ou 5 d’entre eux.
def install(): print('installing geo-covpatch64-22.0_000_004') run(r'msiexec /update "CovPatch64-22.0_000_004.msp" /qn')
j’ai l’erreur :
CalledProcessErrorOutput: Command 'msiexec /update "CovPatch64-22.0_000_004.msp" /qn' returned non-zero exit status 1642.
Par contre si je l’exécute dans une invite de commande sur le poste en question , l’installation s’effectue sans problème.
Est ce que vous avez lancé la ligne de commande en tant qu'utilisateur Administrateur ou LocalSystem? C'est le compte LocalSystem qui est utilisé pour les installations WAPT. Pour passer en LocalSystem, vous installer le paquet tis-ms-pstools, puis vous lancer dans un cmd.exe psexec -i -s cmd msiexec /update "CovPatch64-22.0_000_004.msp" /qn
Il faudrait vérifier si le GUID de l'installeur MSI de la dernière mise à jour n'est pas différent sur les postes en questions (on peut récupérer les GUID en faisant un wapt-get list-registry).
Cordialement,
Denis
J’ai cherché ce code d’erreur mais ça ne m’avance pas trop vu que tous mes pc on exactement la même version installé avant la mise à jour.
Si quelqu’un a une idée je suis preneur :)
Merci d’acance.
Durand didier
GEOVAL
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
-- Denis Cardon Tranquil IT Systems Les Espaces Jules Verne, bâtiment A 12 avenue Jules Verne 44230 Saint Sébastien sur Loire tel : +33 (0) 2.40.97.57.55 http://www.tranquil-it-systems.fr
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
Re bonjour, J'ai le message d'erreur suivant: Le correctif de mise à jour ne peut pas être installé par le service Windows Installer car le programme qui doit être mise à jour peut-être introuvable ou le correctif de mise à jour est peut être destiné à une autre version du programme. Vérifiez que le programme que vous voulez mettre à jour se trouve sur votre ordinateur et que vous disposez de correctif de mise à jour correct.
Cordialement Durand didier
-----Message d'origine----- De : Denis Cardon [mailto:dcardon@tranquil.it] Envoyé : vendredi 19 janvier 2018 09:09 À : Geoval - Durand Didier ddurand@geoval.info; wapt@lists.tranquil.it Objet : Re: [Wapt] problème d'installation d'une MAJ avec msiexec
Bonjour Didier,
Merci pour votre réponse. Pour le GUID de l'appli MSI , il semble bien être identique sur les différentes machine. Par contre j'ai testé la commande avec psexec, rien ne se passe quand j'exécute msiexec /update "CovPatch64-22.0_000_004.msp" /qn
et si vous enlevez le /qn, ça donne quoi? (avec psexec -i -s, les affichages graphiques devrait être redirigé sur votre buffer standard, donc vous devriez avoir l'affichage d'erreur du msiexec).
Denis
Je précise que les autres mises à jour logiciels se passe bien sur les PCs concernés. Cordialement Durand didier Geoval
-----Message d'origine----- De : Denis Cardon [mailto:dcardon@tranquil.it] Envoyé : jeudi 18 janvier 2018 11:59 À : Geoval - Durand didier ddurand@geoval.info; wapt@lists.tranquil.it Objet : Re: [Wapt] problème d'installation d'une MAJ avec msiexec
Bonjour Didier,
J’ai un problème depuis quelque temps pour installer les mises à jour d’une application (COVADIS)
Ça marche sur la plupart de mes poste mais plante sur 4 ou 5 d’entre eux.
def install(): print('installing geo-covpatch64-22.0_000_004') run(r'msiexec /update "CovPatch64-22.0_000_004.msp" /qn')
j’ai l’erreur :
CalledProcessErrorOutput: Command 'msiexec /update "CovPatch64-22.0_000_004.msp" /qn' returned non-zero exit status 1642.
Par contre si je l’exécute dans une invite de commande sur le poste en question , l’installation s’effectue sans problème.
Est ce que vous avez lancé la ligne de commande en tant qu'utilisateur Administrateur ou LocalSystem? C'est le compte LocalSystem qui est utilisé pour les installations WAPT. Pour passer en LocalSystem, vous installer le paquet tis-ms-pstools, puis vous lancer dans un cmd.exe psexec -i -s cmd msiexec /update "CovPatch64-22.0_000_004.msp" /qn
Il faudrait vérifier si le GUID de l'installeur MSI de la dernière mise à jour n'est pas différent sur les postes en questions (on peut récupérer les GUID en faisant un wapt-get list-registry).
Cordialement,
Denis
J’ai cherché ce code d’erreur mais ça ne m’avance pas trop vu que tous mes pc on exactement la même version installé avant la mise à jour.
Si quelqu’un a une idée je suis preneur :)
Merci d’acance.
Durand didier
GEOVAL
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
-- Denis Cardon Tranquil IT Systems Les Espaces Jules Verne, bâtiment A 12 avenue Jules Verne 44230 Saint Sébastien sur Loire tel : +33 (0) 2.40.97.57.55 http://www.tranquil-it-systems.fr
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
-- Denis Cardon Tranquil IT Systems Les Espaces Jules Verne, bâtiment A 12 avenue Jules Verne 44230 Saint Sébastien sur Loire tel : +33 (0) 2.40.97.57.55 http://www.tranquil-it-systems.fr
Bonjour Didier,
J'ai le message d'erreur suivant: Le correctif de mise à jour ne peut pas être installé par le service Windows Installer car le programme qui doit être mise à jour peut-être introuvable ou le correctif de mise à jour est peut être destiné à une autre version du programme. Vérifiez que le programme que vous voulez mettre à jour se trouve sur votre ordinateur et que vous disposez de correctif de mise à jour correct.
Donc l'installation ne se passe pas bien quand on la fait à la main en compte LocalSystem...
Est cette même installation se fait bien quand on la fait à la main en compte Administrateur sur le même poste?
Est ce que l'applicatif ne serait pas installé dans le profil utilisateur?
Cordialement,
Denis
PS : désolé pour le double-posting de mon dernier mail, on a eu un petit cafouillage zimbra ce matin au bureau.
Cordialement Durand didier
-----Message d'origine----- De : Denis Cardon [mailto:dcardon@tranquil.it] Envoyé : vendredi 19 janvier 2018 09:09 À : Geoval - Durand Didier ddurand@geoval.info; wapt@lists.tranquil.it Objet : Re: [Wapt] problème d'installation d'une MAJ avec msiexec
Bonjour Didier,
Merci pour votre réponse. Pour le GUID de l'appli MSI , il semble bien être identique sur les différentes machine. Par contre j'ai testé la commande avec psexec, rien ne se passe quand j'exécute msiexec /update "CovPatch64-22.0_000_004.msp" /qn
et si vous enlevez le /qn, ça donne quoi? (avec psexec -i -s, les affichages graphiques devrait être redirigé sur votre buffer standard, donc vous devriez avoir l'affichage d'erreur du msiexec).
Denis
Je précise que les autres mises à jour logiciels se passe bien sur les PCs concernés. Cordialement Durand didier Geoval
-----Message d'origine----- De : Denis Cardon [mailto:dcardon@tranquil.it] Envoyé : jeudi 18 janvier 2018 11:59 À : Geoval - Durand didier ddurand@geoval.info; wapt@lists.tranquil.it Objet : Re: [Wapt] problème d'installation d'une MAJ avec msiexec
Bonjour Didier,
J’ai un problème depuis quelque temps pour installer les mises à jour d’une application (COVADIS)
Ça marche sur la plupart de mes poste mais plante sur 4 ou 5 d’entre eux.
def install(): print('installing geo-covpatch64-22.0_000_004') run(r'msiexec /update "CovPatch64-22.0_000_004.msp" /qn')
j’ai l’erreur :
CalledProcessErrorOutput: Command 'msiexec /update "CovPatch64-22.0_000_004.msp" /qn' returned non-zero exit status 1642.
Par contre si je l’exécute dans une invite de commande sur le poste en question , l’installation s’effectue sans problème.
Est ce que vous avez lancé la ligne de commande en tant qu'utilisateur Administrateur ou LocalSystem? C'est le compte LocalSystem qui est utilisé pour les installations WAPT. Pour passer en LocalSystem, vous installer le paquet tis-ms-pstools, puis vous lancer dans un cmd.exe psexec -i -s cmd msiexec /update "CovPatch64-22.0_000_004.msp" /qn
Il faudrait vérifier si le GUID de l'installeur MSI de la dernière mise à jour n'est pas différent sur les postes en questions (on peut récupérer les GUID en faisant un wapt-get list-registry).
Cordialement,
Denis
J’ai cherché ce code d’erreur mais ça ne m’avance pas trop vu que tous mes pc on exactement la même version installé avant la mise à jour.
Si quelqu’un a une idée je suis preneur :)
Merci d’acance.
Durand didier
GEOVAL
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
-- Denis Cardon Tranquil IT Systems Les Espaces Jules Verne, bâtiment A 12 avenue Jules Verne 44230 Saint Sébastien sur Loire tel : +33 (0) 2.40.97.57.55 http://www.tranquil-it-systems.fr
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
-- Denis Cardon Tranquil IT Systems Les Espaces Jules Verne, bâtiment A 12 avenue Jules Verne 44230 Saint Sébastien sur Loire tel : +33 (0) 2.40.97.57.55 http://www.tranquil-it-systems.fr
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
Voilà ça semble ne pas marcher en localsystem, et pas de probleme avec une installation en administrateur. L'application s'installe dans C:\Program Files et rien dans les profils utilisateurs. Le plus étrange c'est que ça marche sur une 30ene de PCs sans problèmes et que j'ai ce problème que sur 4 ou 5 PCs. Tous ont la même version de Windows 10. Vraiment là je sèche lol
-----Message d'origine----- De : Denis Cardon [mailto:dcardon@tranquil.it] Envoyé : vendredi 19 janvier 2018 09:46 À : Geoval - Durand Didier ddurand@geoval.info; wapt@lists.tranquil.it Objet : Re: [Wapt] problème d'installation d'une MAJ avec msiexec
Bonjour Didier,
J'ai le message d'erreur suivant: Le correctif de mise à jour ne peut pas être installé par le service Windows Installer car le programme qui doit être mise à jour peut-être introuvable ou le correctif de mise à jour est peut être destiné à une autre version du programme. Vérifiez que le programme que vous voulez mettre à jour se trouve sur votre ordinateur et que vous disposez de correctif de mise à jour correct.
Donc l'installation ne se passe pas bien quand on la fait à la main en compte LocalSystem...
Est cette même installation se fait bien quand on la fait à la main en compte Administrateur sur le même poste?
Est ce que l'applicatif ne serait pas installé dans le profil utilisateur?
Cordialement,
Denis
PS : désolé pour le double-posting de mon dernier mail, on a eu un petit cafouillage zimbra ce matin au bureau.
Cordialement Durand didier
-----Message d'origine----- De : Denis Cardon [mailto:dcardon@tranquil.it] Envoyé : vendredi 19 janvier 2018 09:09 À : Geoval - Durand Didier ddurand@geoval.info; wapt@lists.tranquil.it Objet : Re: [Wapt] problème d'installation d'une MAJ avec msiexec
Bonjour Didier,
Merci pour votre réponse. Pour le GUID de l'appli MSI , il semble bien être identique sur les différentes machine. Par contre j'ai testé la commande avec psexec, rien ne se passe quand j'exécute msiexec /update "CovPatch64-22.0_000_004.msp" /qn
et si vous enlevez le /qn, ça donne quoi? (avec psexec -i -s, les affichages graphiques devrait être redirigé sur votre buffer standard, donc vous devriez avoir l'affichage d'erreur du msiexec).
Denis
Je précise que les autres mises à jour logiciels se passe bien sur les PCs concernés. Cordialement Durand didier Geoval
-----Message d'origine----- De : Denis Cardon [mailto:dcardon@tranquil.it] Envoyé : jeudi 18 janvier 2018 11:59 À : Geoval - Durand didier ddurand@geoval.info; wapt@lists.tranquil.it Objet : Re: [Wapt] problème d'installation d'une MAJ avec msiexec
Bonjour Didier,
J’ai un problème depuis quelque temps pour installer les mises à jour d’une application (COVADIS)
Ça marche sur la plupart de mes poste mais plante sur 4 ou 5 d’entre eux.
def install(): print('installing geo-covpatch64-22.0_000_004') run(r'msiexec /update "CovPatch64-22.0_000_004.msp" /qn')
j’ai l’erreur :
CalledProcessErrorOutput: Command 'msiexec /update "CovPatch64-22.0_000_004.msp" /qn' returned non-zero exit status 1642.
Par contre si je l’exécute dans une invite de commande sur le poste en question , l’installation s’effectue sans problème.
Est ce que vous avez lancé la ligne de commande en tant qu'utilisateur Administrateur ou LocalSystem? C'est le compte LocalSystem qui est utilisé pour les installations WAPT. Pour passer en LocalSystem, vous installer le paquet tis-ms-pstools, puis vous lancer dans un cmd.exe psexec -i -s cmd msiexec /update "CovPatch64-22.0_000_004.msp" /qn
Il faudrait vérifier si le GUID de l'installeur MSI de la dernière mise à jour n'est pas différent sur les postes en questions (on peut récupérer les GUID en faisant un wapt-get list-registry).
Cordialement,
Denis
J’ai cherché ce code d’erreur mais ça ne m’avance pas trop vu que tous mes pc on exactement la même version installé avant la mise à jour.
Si quelqu’un a une idée je suis preneur :)
Merci d’acance.
Durand didier
GEOVAL
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
-- Denis Cardon Tranquil IT Systems Les Espaces Jules Verne, bâtiment A 12 avenue Jules Verne 44230 Saint Sébastien sur Loire tel : +33 (0) 2.40.97.57.55 http://www.tranquil-it-systems.fr
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
-- Denis Cardon Tranquil IT Systems Les Espaces Jules Verne, bâtiment A 12 avenue Jules Verne 44230 Saint Sébastien sur Loire tel : +33 (0) 2.40.97.57.55 http://www.tranquil-it-systems.fr
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
Bonjour Didier,
Pour le GUID de l'appli MSI , il semble bien être identique sur les différentes machine. Par contre j'ai testé la commande avec psexec, rien ne se passe quand j'exécute msiexec /update "CovPatch64-22.0_000_004.msp" /qn Je précise que les autres mises à jour logiciels se passe bien sur les PCs concernés.
Et si vous lancez le msiexec sans le /qn pour avoir un message de retour? (le buffer graphique avec un psexec -i -s est le même que celui d'où vous l'avez lancé).
Denis
Cordialement Durand didier Geoval
-----Message d'origine----- De : Denis Cardon [mailto:dcardon@tranquil.it] Envoyé : jeudi 18 janvier 2018 11:59 À : Geoval - Durand didier ddurand@geoval.info; wapt@lists.tranquil.it Objet : Re: [Wapt] problème d'installation d'une MAJ avec msiexec
Bonjour Didier,
J’ai un problème depuis quelque temps pour installer les mises à jour d’une application (COVADIS)
Ça marche sur la plupart de mes poste mais plante sur 4 ou 5 d’entre eux.
def install(): print('installing geo-covpatch64-22.0_000_004') run(r'msiexec /update "CovPatch64-22.0_000_004.msp" /qn')
j’ai l’erreur :
CalledProcessErrorOutput: Command 'msiexec /update "CovPatch64-22.0_000_004.msp" /qn' returned non-zero exit status 1642.
Par contre si je l’exécute dans une invite de commande sur le poste en question , l’installation s’effectue sans problème.
Est ce que vous avez lancé la ligne de commande en tant qu'utilisateur Administrateur ou LocalSystem? C'est le compte LocalSystem qui est utilisé pour les installations WAPT. Pour passer en LocalSystem, vous installer le paquet tis-ms-pstools, puis vous lancer dans un cmd.exe psexec -i -s cmd msiexec /update "CovPatch64-22.0_000_004.msp" /qn
Il faudrait vérifier si le GUID de l'installeur MSI de la dernière mise à jour n'est pas différent sur les postes en questions (on peut récupérer les GUID en faisant un wapt-get list-registry).
Cordialement,
Denis
J’ai cherché ce code d’erreur mais ça ne m’avance pas trop vu que tous mes pc on exactement la même version installé avant la mise à jour.
Si quelqu’un a une idée je suis preneur :)
Merci d’acance.
Durand didier
GEOVAL
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
-- Denis Cardon Tranquil IT Systems Les Espaces Jules Verne, bâtiment A 12 avenue Jules Verne 44230 Saint Sébastien sur Loire tel : +33 (0) 2.40.97.57.55 http://www.tranquil-it-systems.fr
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
A partir de psexec: msiexec /update "CovPatch64-22.0_000_004.msp" message d'erreur: Le correctif de mise à jour ne peut pas être installé par le service Windows Installer car le programme qui doit être mise à jour peut-être introuvable ou le correctif de mise à jour est peut être destiné à une autre version du programme. Vérifiez que le programme que vous voulez mettre à jour se trouve sur votre ordinateur et que vous disposez de correctif de mise à jour correct.
A partir d'une invite de commande standard: msiexec /update "CovPatch64-22.0_000_004.msp" l'installation se passe sans problème.
-----Message d'origine----- De : Denis Cardon [mailto:dcardon@tranquil.it] Envoyé : vendredi 19 janvier 2018 09:22 À : Geoval - Durand Didier ddurand@geoval.info; wapt@lists.tranquil.it Objet : Re: [Wapt] problème d'installation d'une MAJ avec msiexec
Bonjour Didier,
Pour le GUID de l'appli MSI , il semble bien être identique sur les différentes machine. Par contre j'ai testé la commande avec psexec, rien ne se passe quand j'exécute msiexec /update "CovPatch64-22.0_000_004.msp" /qn Je précise que les autres mises à jour logiciels se passe bien sur les PCs concernés.
Et si vous lancez le msiexec sans le /qn pour avoir un message de retour? (le buffer graphique avec un psexec -i -s est le même que celui d'où vous l'avez lancé).
Denis
Cordialement Durand didier Geoval
-----Message d'origine----- De : Denis Cardon [mailto:dcardon@tranquil.it] Envoyé : jeudi 18 janvier 2018 11:59 À : Geoval - Durand didier ddurand@geoval.info; wapt@lists.tranquil.it Objet : Re: [Wapt] problème d'installation d'une MAJ avec msiexec
Bonjour Didier,
J’ai un problème depuis quelque temps pour installer les mises à jour d’une application (COVADIS)
Ça marche sur la plupart de mes poste mais plante sur 4 ou 5 d’entre eux.
def install(): print('installing geo-covpatch64-22.0_000_004') run(r'msiexec /update "CovPatch64-22.0_000_004.msp" /qn')
j’ai l’erreur :
CalledProcessErrorOutput: Command 'msiexec /update "CovPatch64-22.0_000_004.msp" /qn' returned non-zero exit status 1642.
Par contre si je l’exécute dans une invite de commande sur le poste en question , l’installation s’effectue sans problème.
Est ce que vous avez lancé la ligne de commande en tant qu'utilisateur Administrateur ou LocalSystem? C'est le compte LocalSystem qui est utilisé pour les installations WAPT. Pour passer en LocalSystem, vous installer le paquet tis-ms-pstools, puis vous lancer dans un cmd.exe psexec -i -s cmd msiexec /update "CovPatch64-22.0_000_004.msp" /qn
Il faudrait vérifier si le GUID de l'installeur MSI de la dernière mise à jour n'est pas différent sur les postes en questions (on peut récupérer les GUID en faisant un wapt-get list-registry).
Cordialement,
Denis
J’ai cherché ce code d’erreur mais ça ne m’avance pas trop vu que tous mes pc on exactement la même version installé avant la mise à jour.
Si quelqu’un a une idée je suis preneur :)
Merci d’acance.
Durand didier
GEOVAL
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
-- Denis Cardon Tranquil IT Systems Les Espaces Jules Verne, bâtiment A 12 avenue Jules Verne 44230 Saint Sébastien sur Loire tel : +33 (0) 2.40.97.57.55 http://www.tranquil-it-systems.fr
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
-- Denis Cardon Tranquil IT Systems Les Espaces Jules Verne, bâtiment A 12 avenue Jules Verne 44230 Saint Sébastien sur Loire tel : +33 (0) 2.40.97.57.55 http://www.tranquil-it-systems.fr