wapt-get register
System Power Controls
Error when registering host against server https://10.66.47.5: Error on
server:
'ascii' codec can't decode byte 0xc3 in position 949: ordinal not in
range(128)
Voilà ce que me retourne la commande...
Pour moi c'est l'ajout d'un 2eme wapt sur le réseau , car dans mon
deuxième établissement où je n'ai pas fait de test , le 1.5 windows est
fonctionnel.
J'ai eu ce bug même avec un serveur test debian en 1.5...
Et ce bug à l'air propre à la 1.5 , car mes 1.3 debian n'ont pas flanché.
Ce que je n'ai pas tenté c'est d'éteindre le 1.3 debian en production.
Ce que je vais faire.
Bonne matinée à tous.
--
Adrien Balent
CoTICE 66
Collège Jules Verne - Le Soler
Collège Christian Bourquin - Millas
Le 03/04/2018 à 16:45, Latieule Joel a écrit :
>
> J'avais pas fait gaffe que tu était le Adrien qui m'avait conseillé
> wapt en formation tice ;-)
>
> C'est étrange et je ne vois pas quel en serait la cause. Tel quel peut
> être une machine qui n'est pas correctement enregistrée mais ça
> n'explique pas pourquoi ça fonctionnait correctement il y a quelques
> jours.
>
> Fait un essais d'enregistrement d'un poste avec la commande *wapt-get
> register* mais je doute que cela améliore les choses.
>
> Tu a plus de détail sur les commandes sur
>
https://www.wapt.fr/fr/doc/Utilisation/utilisation_cli/utilisation_cli_speci...
>
> Y a plus qu'à attendre le passage d'une personne plus expérimentée.
>
> Joël LATIEULE - 06.38.02.33.27 / TICE
>
> Collège Victor Hugo - 0110021n
> 5 boulevard Marcel Sembat, 11100 Narbonne
> 04.68.90.24.00
> Le 03/04/2018 à 14:39, Adrien Balent a écrit :
>>
>> Bonjour,
>>
>> Voici ce que me retourne la commande , à vue d'oeil , c'est un
>> résultat normal.
>>
>> Update package list
>> Total packages : 53
>> Added packages :
>>
>> Removed packages :
>>
>> Pending operations :
>> upgrade:
>> additional:
>> install:
>> remove:
>> Repositories URL :
>>
https://10.66.47.5/wapt
>>
https://10.66.47.5/wapt-host
>>
>>
>> Ce que je comprends pas c'est que tout à bien marché pendant 10-12
>> jours , j'ai téléchargé des paquets , les machines les ont bien
>> installées.
>>
>> Et dès que j'ai vu le message du FQDN sur mon poste console/serveur ,
>> le problème à l'air de s'être répercuté sur l'ensemble des postes..
>>
>> J'ai quasiment tout mon parc en ligne en ce moment ( les postes
>> apparaissent bien en vert dans la console ) 7 postes sur 22 ont
>> conservés leur listes de paquets , pour tout le reste la liste est
>> intégralement vide , même pas de paquet uuid.
>>
>>
>> Merci beaucoup , bonne après midi.
>>
>> Cordialement,
>>
>> --
>> Adrien Balent
>> CoTice 66
>> Collège Jules Verne Le Soler - 04 68 92 17 09
>> Collège Christian Bourquin Millas - 04 68 84 63 70
>>
>> Le 03/04/2018 à 14:24, Latieule Joel a écrit :
>>>
>>> Est-ce que tu peut faire un essai depuis le terminal de commande ?
>>> Cela permet d'obtenir plus d'information.
>>>
>>> outil : cmd
>>>
>>> commande : wapt-get update
>>>
>>> Peut être est-ce un problème de signature qui n'est pas appliqué sur
>>> les paquets machines. Cela m'est arrivé après la migration vers wapt 1.5
>>>
>>> Joël LATIEULE - 06.38.02.33.27 / TICE
>>>
>>> Collège Victor Hugo - 0110021n
>>> 5 boulevard Marcel Sembat, 11100 Narbonne
>>> 04.68.90.24.00
>>> Le 03/04/2018 à 11:10, Adrien Balent a écrit :
>>>> Bonjour à tous,
>>>>
>>>> J'ai migré mon wapt windows il y a deux semaines , tout fonctionnait
>>>> très bien , jusqu'à la fin de la semaine dernière.
>>>>
>>>> Je me suis rendu compte que tous les postes apparaissaient dans la
>>>> console , mais avec aucun paquet attribué.
>>>>
>>>> Si je tente de leur attribuer un paquet ou un groupe , il s'ajoute
>>>> bien
>>>> en dépendance dans la configuration du poste.
>>>>
>>>> Mais quand on actualise , il n'y a uniquement le paquet uuid qui
>>>> apparaît comme étant manquant , puis disparaît au bout de quelques
>>>> secondes.
>>>>
>>>> Si on se met côté client avec le tray d'ouvert , on peut voir
>>>> passer les
>>>> deux messages suivants ( Voir PJ )
>>>>
>>>> J'ai tenté une réinstallation du client , rien n'y fait , un
>>>> changement
>>>> d'uuid aussi.
>>>>
>>>> Même mon poste serveur / console à ce soucis..
>>>>
>>>> Qui plus est j'ai essayé d'installer la dernière version de wapt ,
>>>> mais
>>>> TrendMicro Officescan supprime le fichier " waptconsole.exe" avant la
>>>> post conf... ( voir PJ )
>>>>
>>>> Sans que je puisse y faire quoi que ce soit.
>>>>
>>>> Le serveur n'a pas changé d'ip , d'os , je n'ai pas de dns les clients
>>>> pointent une ip.
>>>>
>>>> La seule chose que je vois qui aurait pu poser soucis c'est que j'ai
>>>> monté un serveur de test debian ( autre ip , autre jeu de clé etc
>>>> ) sur
>>>> le même réseau ?
>>>>
>>>>
>>>> Merci d'avance , bonne journée,
>>>>
>>>> Bien cordialement,
>>>>
>>>>
>>>> _______________________________________________
>>>> WAPT mailing list
>>>> WAPT@lists.tranquil.it
>>>>
http://lists.tranquil.it/listinfo/wapt
>>>
>>>
>>> _______________________________________________
>>> WAPT mailing list
>>> WAPT@lists.tranquil.it
>>>
http://lists.tranquil.it/listinfo/wapt
>>
>>
>> _______________________________________________
>> WAPT mailing list
>> WAPT@lists.tranquil.it
>>
http://lists.tranquil.it/listinfo/wapt
>
>
> _______________________________________________
> WAPT mailing list
> WAPT@lists.tranquil.it
>
http://lists.tranquil.it/listinfo/wapt