Bonjour,
Est-il possible d'installer un paquet local, c'est à dire qui a été compilé mais pas ajouté au dépôt, depuis un paquet WAPT ?
J'ai essayé ceci, après avoir copié le fichier .wapt dans le paquet : /WAPT.install('monpaquet.wapt')/ et /run(r'wapt-get install monpaquet.wapt')/
Mais ça ne fonctionne pas.
Je sais c'est un peu farfelu mais je n'ai pas le choix, je ne peux pas rajouter le paquet au dépôt. Sinon il faudra que je déploie à la main sur tous les postes concernés (~50)...
Merci d'avance. Bastien
Bonjour Bastien,
pourquoi le paquet ne peut-il pas être mis sur le dépôt ?
----------------------------------------------------------------------------------------------
*Gaëtan SEGAT * Gestionnaire Parc Informatique Inserm| DRSI Toulouse CHU Purpan – BP 3048 | 31024 Toulouse cedex 3 Tél. 05 62 74 83 58
Le 25/06/2020 à 16:15, Bastien HERMITTE a écrit :
Bonjour,
Est-il possible d'installer un paquet local, c'est à dire qui a été compilé mais pas ajouté au dépôt, depuis un paquet WAPT ?
J'ai essayé ceci, après avoir copié le fichier .wapt dans le paquet : /WAPT.install('monpaquet.wapt')/ et /run(r'wapt-get install monpaquet.wapt')/
Mais ça ne fonctionne pas.
Je sais c'est un peu farfelu mais je n'ai pas le choix, je ne peux pas rajouter le paquet au dépôt. Sinon il faudra que je déploie à la main sur tous les postes concernés (~50)...
Merci d'avance. Bastien
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
Bonjour,
Car sinon il va se mettre à jour sur tous les postes d'un coup, ce que je ne veux pas.
Cordialement, Bastien
Le 25/06/2020 à 16:26, Gaëtan SEGAT a écrit :
Bonjour Bastien,
pourquoi le paquet ne peut-il pas être mis sur le dépôt ?
*Gaëtan SEGAT * Gestionnaire Parc Informatique Inserm| DRSI Toulouse CHU Purpan – BP 3048 | 31024 Toulouse cedex 3 Tél. 05 62 74 83 58
Le 25/06/2020 à 16:15, Bastien HERMITTE a écrit :
Bonjour,
Est-il possible d'installer un paquet local, c'est à dire qui a été compilé mais pas ajouté au dépôt, depuis un paquet WAPT ?
J'ai essayé ceci, après avoir copié le fichier .wapt dans le paquet : /WAPT.install('monpaquet.wapt')/ et /run(r'wapt-get install monpaquet.wapt')/
Mais ça ne fonctionne pas.
Je sais c'est un peu farfelu mais je n'ai pas le choix, je ne peux pas rajouter le paquet au dépôt. Sinon il faudra que je déploie à la main sur tous les postes concernés (~50)...
Merci d'avance. Bastien
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
Si le paquet est mis à jour, il ne s'installera qu'à l'arrêt des machines.
Gaëtan
Le 25/06/2020 à 16:38, Bastien HERMITTE a écrit :
Bonjour,
Car sinon il va se mettre à jour sur tous les postes d'un coup, ce que je ne veux pas.
Cordialement, Bastien
Le 25/06/2020 à 16:26, Gaëtan SEGAT a écrit :
Bonjour Bastien,
pourquoi le paquet ne peut-il pas être mis sur le dépôt ?
*Gaëtan SEGAT * Gestionnaire Parc Informatique Inserm| DRSI Toulouse CHU Purpan – BP 3048 | 31024 Toulouse cedex 3 Tél. 05 62 74 83 58
Le 25/06/2020 à 16:15, Bastien HERMITTE a écrit :
Bonjour,
Est-il possible d'installer un paquet local, c'est à dire qui a été compilé mais pas ajouté au dépôt, depuis un paquet WAPT ?
J'ai essayé ceci, après avoir copié le fichier .wapt dans le paquet : /WAPT.install('monpaquet.wapt')/ et /run(r'wapt-get install monpaquet.wapt')/
Mais ça ne fonctionne pas.
Je sais c'est un peu farfelu mais je n'ai pas le choix, je ne peux pas rajouter le paquet au dépôt. Sinon il faudra que je déploie à la main sur tous les postes concernés (~50)...
Merci d'avance. Bastien
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
Bonjour,
Merci, je sais, là n'est pas la question.
Je veux simplement savoir si c'est possible d'installer un paquet compilé, donc au format .wapt, depuis un paquet WAPT, et si oui comment.
Cordialement, Bastien
Le 25/06/2020 à 16:49, Gaëtan SEGAT a écrit :
Si le paquet est mis à jour, il ne s'installera qu'à l'arrêt des machines.
Gaëtan
Le 25/06/2020 à 16:38, Bastien HERMITTE a écrit :
Bonjour,
Car sinon il va se mettre à jour sur tous les postes d'un coup, ce que je ne veux pas.
Cordialement, Bastien
Le 25/06/2020 à 16:26, Gaëtan SEGAT a écrit :
Bonjour Bastien,
pourquoi le paquet ne peut-il pas être mis sur le dépôt ?
*Gaëtan SEGAT * Gestionnaire Parc Informatique Inserm| DRSI Toulouse CHU Purpan – BP 3048 | 31024 Toulouse cedex 3 Tél. 05 62 74 83 58
Le 25/06/2020 à 16:15, Bastien HERMITTE a écrit :
Bonjour,
Est-il possible d'installer un paquet local, c'est à dire qui a été compilé mais pas ajouté au dépôt, depuis un paquet WAPT ?
J'ai essayé ceci, après avoir copié le fichier .wapt dans le paquet : /WAPT.install('monpaquet.wapt')/ et /run(r'wapt-get install monpaquet.wapt')/
Mais ça ne fonctionne pas.
Je sais c'est un peu farfelu mais je n'ai pas le choix, je ne peux pas rajouter le paquet au dépôt. Sinon il faudra que je déploie à la main sur tous les postes concernés (~50)...
Merci d'avance. Bastien
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
Bonjour à tous,
Merci, je sais, là n'est pas la question.
la question de Gaëtan était quand même intéressante. Car en fait pour ce cas d'usage il y a déjà tout qui est prévu. Il suffit de définir une maturité sur les postes et de l'affecter au paquet...
Je veux simplement savoir si c'est possible d'installer un paquet compilé, donc au format .wapt, depuis un paquet WAPT, et si oui comment.
j'en sais rien, il faut lire le code.
Cordialement,
Denis
Cordialement, Bastien
Le 25/06/2020 à 16:49, Gaëtan SEGAT a écrit :
Si le paquet est mis à jour, il ne s'installera qu'à l'arrêt des machines.
Gaëtan
Le 25/06/2020 à 16:38, Bastien HERMITTE a écrit :
Bonjour,
Car sinon il va se mettre à jour sur tous les postes d'un coup, ce que je ne veux pas.
Cordialement, Bastien
Le 25/06/2020 à 16:26, Gaëtan SEGAT a écrit :
Bonjour Bastien,
pourquoi le paquet ne peut-il pas être mis sur le dépôt ?
*Gaëtan SEGAT * Gestionnaire Parc Informatique Inserm| DRSI Toulouse CHU Purpan – BP 3048 | 31024 Toulouse cedex 3 Tél. 05 62 74 83 58
Le 25/06/2020 à 16:15, Bastien HERMITTE a écrit :
Bonjour,
Est-il possible d'installer un paquet local, c'est à dire qui a été compilé mais pas ajouté au dépôt, depuis un paquet WAPT ?
J'ai essayé ceci, après avoir copié le fichier .wapt dans le paquet : /WAPT.install('monpaquet.wapt')/ et /run(r'wapt-get install monpaquet.wapt')/
Mais ça ne fonctionne pas.
Je sais c'est un peu farfelu mais je n'ai pas le choix, je ne peux pas rajouter le paquet au dépôt. Sinon il faudra que je déploie à la main sur tous les postes concernés (~50)...
Merci d'avance. Bastien
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
Bonjour
Je veux simplement savoir si c'est possible d'installer un paquet compilé, donc au format .wapt, depuis un paquet WAPT, et si oui comment.
Bastien, pour moi, ton besoin est couvert avec le principe des dépendances, non ?
Vincent
j'en sais rien, il faut lire le code.
Cordialement,
Denis
Cordialement, Bastien
Le 25/06/2020 à 16:49, Gaëtan SEGAT a écrit :
Si le paquet est mis à jour, il ne s'installera qu'à l'arrêt des machines.
Gaëtan
Le 25/06/2020 à 16:38, Bastien HERMITTE a écrit :
Bonjour,
Car sinon il va se mettre à jour sur tous les postes d'un coup, ce que je ne veux pas.
Cordialement, Bastien
Le 25/06/2020 à 16:26, Gaëtan SEGAT a écrit :
Bonjour Bastien,
pourquoi le paquet ne peut-il pas être mis sur le dépôt ?
*Gaëtan SEGAT * Gestionnaire Parc Informatique Inserm| DRSI Toulouse CHU Purpan – BP 3048 | 31024 Toulouse cedex 3 Tél. 05 62 74 83 58
Le 25/06/2020 à 16:15, Bastien HERMITTE a écrit :
Bonjour,
Est-il possible d'installer un paquet local, c'est à dire qui a été compilé mais pas ajouté au dépôt, depuis un paquet WAPT ?
J'ai essayé ceci, après avoir copié le fichier .wapt dans le paquet : /WAPT.install('monpaquet.wapt')/ et /run(r'wapt-get install monpaquet.wapt')/
Mais ça ne fonctionne pas.
Je sais c'est un peu farfelu mais je n'ai pas le choix, je ne peux pas rajouter le paquet au dépôt. Sinon il faudra que je déploie à la main sur tous les postes concernés (~50)...
Merci d'avance. Bastien
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
Bonjour Vincent et Denis. / //> Bastien, pour moi, ton besoin est couvert avec le principe des dépendances, non ?// / Dans l'absolu oui, mais pour le coup c'est un cas particulier :)
Je m'explique. J'ai des paquets compilés prêts pour une nouvelle version majeure d'un logiciel. Je souhaiterai l'installer petit à petit sur des parties de mon parc, car il y a de multiples paquets qui vont avec et qui sont différents selon les services. Selon les services, il faut installer tel ou tel paquet en plus, désinstaller celui-ci avant, ne pas installer celui-là, ou bien avant celui ci..
J'admets que ce n'est pas optimal, mais pour passer sur cette nouvelle version majeure, je suis obligé de passer par là.
J'aurais donc aimé faire un paquet WAPT qui gérerait tout ces cas, et que j'aurai pu déployer petit à petit. L'avantage est qu'une fois déployés partout de cette façon, j'aurai ajouté tous les paquets compilés au dépôt, et aurait pu continuer de les mettre à jour comme d'habitude. Sans avoir des dépendances dans tout les sens à gérer plus tard.
/> la question de Gaëtan était quand même intéressante. Car en fait pour ce cas d'usage il y a déjà tout qui est prévu. Il suffit de définir une maturité sur les postes et de l'affecter au paquet... /
J'admets ne jamais avoir pris le temps de me pencher sur ce mécanisme. Mais je pense que je dois juste mal utiliser WAPT, ou du moins ne pas en exploiter toutes les possibilités, faute de temps pour m'y pencher, je reste sur ce que je connais. Entre dépendance et maturité, il y a probablement moyen de répondre à ma problématique.
/> j'en sais rien, il faut lire le code. /
Ma question, certes peut être mal formulée, était plutôt de savoir si quelqu'un l'avait déjà fait, ou s'il existait un mécanisme déjà existant pour ce cas. Mais merci pour cette remarque très pertinente.
Quoi qu'il en soit, je suis du coup parti sur un script maison que je vais déployer à la main.
Cordialement, Bastien
Le 25/06/2020 à 17:59, Vincent CARDON a écrit :
Bonjour
> Je veux simplement savoir si c'est possible d'installer un paquet > compilé, donc au format .wapt, depuis un paquet WAPT, et si oui comment.
Bastien, pour moi, ton besoin est couvert avec le principe des dépendances, non ?
Vincent
j'en sais rien, il faut lire le code. Cordialement, Denis > Cordialement, > Bastien > > Le 25/06/2020 à 16:49, Gaëtan SEGAT a écrit : >> >> Si le paquet est mis à jour, il ne s'installera qu'à l'arrêt des machines. >> >> Gaëtan >> >> Le 25/06/2020 à 16:38, Bastien HERMITTE a écrit : >>> Bonjour, >>> >>> Car sinon il va se mettre à jour sur tous les postes d'un coup, ce >>> que je ne veux pas. >>> >>> Cordialement, >>> Bastien >>> >>> Le 25/06/2020 à 16:26, Gaëtan SEGAT a écrit : >>>> >>>> Bonjour Bastien, >>>> >>>> pourquoi le paquet ne peut-il pas être mis sur le dépôt ? >>>> >>>> ---------------------------------------------------------------------------------------------- >>>> >>>> *Gaëtan SEGAT * >>>> Gestionnaire Parc Informatique >>>> Inserm| DRSI Toulouse >>>> CHU Purpan – BP 3048 | 31024 Toulouse cedex 3 >>>> Tél. 05 62 74 83 58 >>>> >>>> <http://www.inserm.fr> >>>> >>>> Le 25/06/2020 à 16:15, Bastien HERMITTE a écrit : >>>>> Bonjour, >>>>> >>>>> Est-il possible d'installer un paquet local, c'est à dire qui a été >>>>> compilé mais pas ajouté au dépôt, depuis un paquet WAPT ? >>>>> >>>>> J'ai essayé ceci, après avoir copié le fichier .wapt dans le paquet : >>>>> /WAPT.install('monpaquet.wapt')/ >>>>> et >>>>> /run(r'wapt-get install monpaquet.wapt')/ >>>>> >>>>> Mais ça ne fonctionne pas. >>>>> >>>>> Je sais c'est un peu farfelu mais je n'ai pas le choix, je ne peux >>>>> pas rajouter le paquet au dépôt. >>>>> Sinon il faudra que je déploie à la main sur tous les postes >>>>> concernés (~50)... >>>>> >>>>> Merci d'avance. >>>>> Bastien >>>>> >>>>> _______________________________________________ >>>>> WAPT mailing list >>>>> WAPT@lists.tranquil.it >>>>> http://lists.tranquil.it/listinfo/wapt >>>> >>>> _______________________________________________ >>>> WAPT mailing list >>>> WAPT@lists.tranquil.it >>>> http://lists.tranquil.it/listinfo/wapt >>> >>> >>> _______________________________________________ >>> WAPT mailing list >>> WAPT@lists.tranquil.it >>> http://lists.tranquil.it/listinfo/wapt >> >> _______________________________________________ >> WAPT mailing list >> WAPT@lists.tranquil.it >> http://lists.tranquil.it/listinfo/wapt > > > _______________________________________________ > WAPT mailing list > WAPT@lists.tranquil.it > http://lists.tranquil.it/listinfo/wapt > _______________________________________________ WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
-- Vincent CARDON, Président Tranquil IT 12 avenue Jules Verne Bâtiment A (Alliance Libre) 44230 Saint Sébastien sur Loire (FRANCE) tel: +33(0)240 975 755 https://www.tranquil.it TVA: FR19443884580
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
Salut Bastien,
pas de soucis par rapport à ton problème de déploiement. La question est légitime, je suis sûr que d'autre se sont déjà posé la question.
En fait si tu déploies une conf [1] tu peux rajouter un paramètre maturities [2] et si tu affectes la maturités (qui est en fait un peu comme un tag) à ton paquet, uniquement les machines qui ont la maturité en question verront le paquet. La maturité PROD est implicite si il n'y a rien noté dans le paquet, et c'est une maturité accepté par défaut par l'agent wapt.
Donc tu peux rajouter la maturité PREPROD sur un sous-ensemble de ton parc et la généraliser au fur et à mesure que valide le déploiement.
Une fois que ton déploiement est entièrement validé, tu supprimes la maturité et tu reviens dans le cas standard;
à bientôt,
Denis
[1] https://store.wapt.fr/store/tis-wapt-conf-policy [2] https://lists.tranquil.it/pipermail/wapt/2018-March/002708.html
Le 25/06/2020 à 18:49, Bastien HERMITTE a écrit :
Bonjour Vincent et Denis. / //> Bastien, pour moi, ton besoin est couvert avec le principe des dépendances, non ?// / Dans l'absolu oui, mais pour le coup c'est un cas particulier :)
Je m'explique. J'ai des paquets compilés prêts pour une nouvelle version majeure d'un logiciel. Je souhaiterai l'installer petit à petit sur des parties de mon parc, car il y a de multiples paquets qui vont avec et qui sont différents selon les services. Selon les services, il faut installer tel ou tel paquet en plus, désinstaller celui-ci avant, ne pas installer celui-là, ou bien avant celui ci..
J'admets que ce n'est pas optimal, mais pour passer sur cette nouvelle version majeure, je suis obligé de passer par là.
J'aurais donc aimé faire un paquet WAPT qui gérerait tout ces cas, et que j'aurai pu déployer petit à petit. L'avantage est qu'une fois déployés partout de cette façon, j'aurai ajouté tous les paquets compilés au dépôt, et aurait pu continuer de les mettre à jour comme d'habitude. Sans avoir des dépendances dans tout les sens à gérer plus tard.
/> la question de Gaëtan était quand même intéressante. Car en fait pour ce cas d'usage il y a déjà tout qui est prévu. Il suffit de définir une maturité sur les postes et de l'affecter au paquet... /
J'admets ne jamais avoir pris le temps de me pencher sur ce mécanisme. Mais je pense que je dois juste mal utiliser WAPT, ou du moins ne pas en exploiter toutes les possibilités, faute de temps pour m'y pencher, je reste sur ce que je connais. Entre dépendance et maturité, il y a probablement moyen de répondre à ma problématique.
/> j'en sais rien, il faut lire le code. /
Ma question, certes peut être mal formulée, était plutôt de savoir si quelqu'un l'avait déjà fait, ou s'il existait un mécanisme déjà existant pour ce cas. Mais merci pour cette remarque très pertinente.
Quoi qu'il en soit, je suis du coup parti sur un script maison que je vais déployer à la main.
Cordialement, Bastien
Le 25/06/2020 à 17:59, Vincent CARDON a écrit :
Bonjour
> Je veux simplement savoir si c'est possible d'installer un paquet > compilé, donc au format .wapt, depuis un paquet WAPT, et si oui comment.
Bastien, pour moi, ton besoin est couvert avec le principe des dépendances, non ?
Vincent
j'en sais rien, il faut lire le code. Cordialement, Denis > Cordialement, > Bastien > > Le 25/06/2020 à 16:49, Gaëtan SEGAT a écrit : >> >> Si le paquet est mis à jour, il ne s'installera qu'à l'arrêt des machines. >> >> Gaëtan >> >> Le 25/06/2020 à 16:38, Bastien HERMITTE a écrit : >>> Bonjour, >>> >>> Car sinon il va se mettre à jour sur tous les postes d'un coup, ce >>> que je ne veux pas. >>> >>> Cordialement, >>> Bastien >>> >>> Le 25/06/2020 à 16:26, Gaëtan SEGAT a écrit : >>>> >>>> Bonjour Bastien, >>>> >>>> pourquoi le paquet ne peut-il pas être mis sur le dépôt ? >>>> >>>> ---------------------------------------------------------------------------------------------- >>>> >>>> *Gaëtan SEGAT * >>>> Gestionnaire Parc Informatique >>>> Inserm| DRSI Toulouse >>>> CHU Purpan – BP 3048 | 31024 Toulouse cedex 3 >>>> Tél. 05 62 74 83 58 >>>> >>>> <http://www.inserm.fr> >>>> >>>> Le 25/06/2020 à 16:15, Bastien HERMITTE a écrit : >>>>> Bonjour, >>>>> >>>>> Est-il possible d'installer un paquet local, c'est à dire qui a été >>>>> compilé mais pas ajouté au dépôt, depuis un paquet WAPT ? >>>>> >>>>> J'ai essayé ceci, après avoir copié le fichier .wapt dans le paquet : >>>>> /WAPT.install('monpaquet.wapt')/ >>>>> et >>>>> /run(r'wapt-get install monpaquet.wapt')/ >>>>> >>>>> Mais ça ne fonctionne pas. >>>>> >>>>> Je sais c'est un peu farfelu mais je n'ai pas le choix, je ne peux >>>>> pas rajouter le paquet au dépôt. >>>>> Sinon il faudra que je déploie à la main sur tous les postes >>>>> concernés (~50)... >>>>> >>>>> Merci d'avance. >>>>> Bastien >>>>> >>>>> _______________________________________________ >>>>> WAPT mailing list >>>>> WAPT@lists.tranquil.it >>>>> http://lists.tranquil.it/listinfo/wapt >>>> >>>> _______________________________________________ >>>> WAPT mailing list >>>> WAPT@lists.tranquil.it >>>> http://lists.tranquil.it/listinfo/wapt >>> >>> >>> _______________________________________________ >>> WAPT mailing list >>> WAPT@lists.tranquil.it >>> http://lists.tranquil.it/listinfo/wapt >> >> _______________________________________________ >> WAPT mailing list >> WAPT@lists.tranquil.it >> http://lists.tranquil.it/listinfo/wapt > > > _______________________________________________ > WAPT mailing list > WAPT@lists.tranquil.it > http://lists.tranquil.it/listinfo/wapt > _______________________________________________ WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
-- Vincent CARDON, Président Tranquil IT 12 avenue Jules Verne Bâtiment A (Alliance Libre) 44230 Saint Sébastien sur Loire (FRANCE) tel: +33(0)240 975 755 https://www.tranquil.it TVA: FR19443884580
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
Salut Denis,
Effectivement, couplé aux dépendances, c'est exactement ce qu'il me faut. Merci pour les explications, je vais essayer de me pencher dessus cet été, je devrais avoir plus de temps libre :)
Cordialement, Bastien
Le 26/06/2020 à 00:23, Denis CARDON a écrit :
Salut Bastien,
pas de soucis par rapport à ton problème de déploiement. La question est légitime, je suis sûr que d'autre se sont déjà posé la question.
En fait si tu déploies une conf [1] tu peux rajouter un paramètre maturities [2] et si tu affectes la maturités (qui est en fait un peu comme un tag) à ton paquet, uniquement les machines qui ont la maturité en question verront le paquet. La maturité PROD est implicite si il n'y a rien noté dans le paquet, et c'est une maturité accepté par défaut par l'agent wapt.
Donc tu peux rajouter la maturité PREPROD sur un sous-ensemble de ton parc et la généraliser au fur et à mesure que valide le déploiement.
Une fois que ton déploiement est entièrement validé, tu supprimes la maturité et tu reviens dans le cas standard;
à bientôt,
Denis
[1] https://store.wapt.fr/store/tis-wapt-conf-policy [2] https://lists.tranquil.it/pipermail/wapt/2018-March/002708.html
Le 25/06/2020 à 18:49, Bastien HERMITTE a écrit :
Bonjour Vincent et Denis. / //> Bastien, pour moi, ton besoin est couvert avec le principe des dépendances, non ?// / Dans l'absolu oui, mais pour le coup c'est un cas particulier :)
Je m'explique. J'ai des paquets compilés prêts pour une nouvelle version majeure d'un logiciel. Je souhaiterai l'installer petit à petit sur des parties de mon parc, car il y a de multiples paquets qui vont avec et qui sont différents selon les services. Selon les services, il faut installer tel ou tel paquet en plus, désinstaller celui-ci avant, ne pas installer celui-là, ou bien avant celui ci..
J'admets que ce n'est pas optimal, mais pour passer sur cette nouvelle version majeure, je suis obligé de passer par là.
J'aurais donc aimé faire un paquet WAPT qui gérerait tout ces cas, et que j'aurai pu déployer petit à petit. L'avantage est qu'une fois déployés partout de cette façon, j'aurai ajouté tous les paquets compilés au dépôt, et aurait pu continuer de les mettre à jour comme d'habitude. Sans avoir des dépendances dans tout les sens à gérer plus tard.
/> la question de Gaëtan était quand même intéressante. Car en fait pour ce cas d'usage il y a déjà tout qui est prévu. Il suffit de définir une maturité sur les postes et de l'affecter au paquet... /
J'admets ne jamais avoir pris le temps de me pencher sur ce mécanisme. Mais je pense que je dois juste mal utiliser WAPT, ou du moins ne pas en exploiter toutes les possibilités, faute de temps pour m'y pencher, je reste sur ce que je connais. Entre dépendance et maturité, il y a probablement moyen de répondre à ma problématique.
/> j'en sais rien, il faut lire le code. /
Ma question, certes peut être mal formulée, était plutôt de savoir si quelqu'un l'avait déjà fait, ou s'il existait un mécanisme déjà existant pour ce cas. Mais merci pour cette remarque très pertinente.
Quoi qu'il en soit, je suis du coup parti sur un script maison que je vais déployer à la main.
Cordialement, Bastien
Le 25/06/2020 à 17:59, Vincent CARDON a écrit :
Bonjour
> Je veux simplement savoir si c'est possible d'installer un paquet > compilé, donc au format .wapt, depuis un paquet WAPT, et si oui comment.
Bastien, pour moi, ton besoin est couvert avec le principe des dépendances, non ?
Vincent
j'en sais rien, il faut lire le code.
Cordialement,
Denis
> Cordialement, > Bastien > > Le 25/06/2020 à 16:49, Gaëtan SEGAT a écrit : >> >> Si le paquet est mis à jour, il ne s'installera qu'à l'arrêt des machines. >> >> Gaëtan >> >> Le 25/06/2020 à 16:38, Bastien HERMITTE a écrit : >>> Bonjour, >>> >>> Car sinon il va se mettre à jour sur tous les postes d'un coup, ce >>> que je ne veux pas. >>> >>> Cordialement, >>> Bastien >>> >>> Le 25/06/2020 à 16:26, Gaëtan SEGAT a écrit : >>>> >>>> Bonjour Bastien, >>>> >>>> pourquoi le paquet ne peut-il pas être mis sur le dépôt ? >>>> >>>>
>>>> >>>> *Gaëtan SEGAT * >>>> Gestionnaire Parc Informatique >>>> Inserm| DRSI Toulouse >>>> CHU Purpan – BP 3048 | 31024 Toulouse cedex 3 >>>> Tél. 05 62 74 83 58 >>>> >>>> http://www.inserm.fr >>>> >>>> Le 25/06/2020 à 16:15, Bastien HERMITTE a écrit : >>>>> Bonjour, >>>>> >>>>> Est-il possible d'installer un paquet local, c'est à dire qui a été >>>>> compilé mais pas ajouté au dépôt, depuis un paquet WAPT ? >>>>> >>>>> J'ai essayé ceci, après avoir copié le fichier .wapt dans le paquet : >>>>> /WAPT.install('monpaquet.wapt')/ >>>>> et >>>>> /run(r'wapt-get install monpaquet.wapt')/ >>>>> >>>>> Mais ça ne fonctionne pas. >>>>> >>>>> Je sais c'est un peu farfelu mais je n'ai pas le choix, je ne peux >>>>> pas rajouter le paquet au dépôt. >>>>> Sinon il faudra que je déploie à la main sur tous les postes >>>>> concernés (~50)... >>>>> >>>>> Merci d'avance. >>>>> Bastien >>>>> >>>>> _______________________________________________ >>>>> WAPT mailing list >>>>> WAPT@lists.tranquil.it >>>>> http://lists.tranquil.it/listinfo/wapt >>>> >>>> _______________________________________________ >>>> WAPT mailing list >>>> WAPT@lists.tranquil.it >>>> http://lists.tranquil.it/listinfo/wapt >>> >>> >>> _______________________________________________ >>> WAPT mailing list >>> WAPT@lists.tranquil.it >>> http://lists.tranquil.it/listinfo/wapt >> >> _______________________________________________ >> WAPT mailing list >> WAPT@lists.tranquil.it >> http://lists.tranquil.it/listinfo/wapt > > > _______________________________________________ > WAPT mailing list > WAPT@lists.tranquil.it > http://lists.tranquil.it/listinfo/wapt > _______________________________________________ WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
-- Vincent CARDON, Président Tranquil IT 12 avenue Jules Verne Bâtiment A (Alliance Libre) 44230 Saint Sébastien sur Loire (FRANCE) tel: +33(0)240 975 755 https://www.tranquil.it TVA: FR19443884580
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
Bonjour Bastien, bonjour à tous,
A des fins de tests pendant le confinement, je compilais en local et installais en local, sans passer par mon serveur.
Depuis mon répertoire waptdev : wapt-get build-package Mon-Paquet-wapt wapt-get install Mon-Paquet-Compile_Version_all.wapt
Je ne remontais la version que lorsque tout était bon (économie de temps et de bande passante.)
Bonne journée.
Bonjour Yann,
C'est exactement ce que je fais :)
Mais j'ai une ribambelle de paquets compilés en local à installer dans un certain ordre, d’où la demande de savoir si on pouvais les installer depuis un paquet WAPT.
Mais je vais me pencher sur le mécanisme de maturité comme expliqué par Denis, qui sera je pense le plus efficace pour mon cas d'usage ;)
Cordialement, Bastien
Le 26/06/2020 à 08:48, TYRODE Yann (ISC) a écrit :
Bonjour Bastien, bonjour à tous,
A des fins de tests pendant le confinement, je compilais en local et installais en local, sans passer par mon serveur.
Depuis mon répertoire waptdev : wapt-get build-package Mon-Paquet-wapt wapt-get install Mon-Paquet-Compile_Version_all.wapt
Je ne remontais la version que lorsque tout était bon (économie de temps et de bande passante.)
Bonne journée.
Yann Tyrode Service Informatique IUT Louis Pasteur Université de Strasbourg Téléphone : (03 688) 52 541 yann.tyrode@unistra.fr
*De: *"Bastien HERMITTE" bhermitte@b2pweb.com *À: *"WAPT" wapt@lists.tranquil.it *Envoyé: *Jeudi 25 Juin 2020 18:49:11 *Objet: *Re: [Wapt] Installer un paquet local depuis un paquet WAPT
Bonjour Vincent et Denis. / //> Bastien, pour moi, ton besoin est couvert avec le principe des dépendances, non ?// / Dans l'absolu oui, mais pour le coup c'est un cas particulier :)
Je m'explique. J'ai des paquets compilés prêts pour une nouvelle version majeure d'un logiciel. Je souhaiterai l'installer petit à petit sur des parties de mon parc, car il y a de multiples paquets qui vont avec et qui sont différents selon les services. Selon les services, il faut installer tel ou tel paquet en plus, désinstaller celui-ci avant, ne pas installer celui-là, ou bien avant celui ci..
J'admets que ce n'est pas optimal, mais pour passer sur cette nouvelle version majeure, je suis obligé de passer par là.
J'aurais donc aimé faire un paquet WAPT qui gérerait tout ces cas, et que j'aurai pu déployer petit à petit. L'avantage est qu'une fois déployés partout de cette façon, j'aurai ajouté tous les paquets compilés au dépôt, et aurait pu continuer de les mettre à jour comme d'habitude. Sans avoir des dépendances dans tout les sens à gérer plus tard.
/> la question de Gaëtan était quand même intéressante. Car en fait pour ce cas d'usage il y a déjà tout qui est prévu. Il suffit de définir une maturité sur les postes et de l'affecter au paquet... /
J'admets ne jamais avoir pris le temps de me pencher sur ce mécanisme. Mais je pense que je dois juste mal utiliser WAPT, ou du moins ne pas en exploiter toutes les possibilités, faute de temps pour m'y pencher, je reste sur ce que je connais. Entre dépendance et maturité, il y a probablement moyen de répondre à ma problématique.
/> j'en sais rien, il faut lire le code. /
Ma question, certes peut être mal formulée, était plutôt de savoir si quelqu'un l'avait déjà fait, ou s'il existait un mécanisme déjà existant pour ce cas. Mais merci pour cette remarque très pertinente.
Quoi qu'il en soit, je suis du coup parti sur un script maison que je vais déployer à la main.
Cordialement, Bastien
Le 25/06/2020 à 17:59, Vincent CARDON a écrit :
Bonjour > Je veux simplement savoir si c'est possible d'installer un paquet > compilé, donc au format .wapt, depuis un paquet WAPT, et si oui comment. Bastien, pour moi, ton besoin est couvert avec le principe des dépendances, non ? Vincent j'en sais rien, il faut lire le code. Cordialement, Denis > Cordialement, > Bastien > > Le 25/06/2020 à 16:49, Gaëtan SEGAT a écrit : >> >> Si le paquet est mis à jour, il ne s'installera qu'à l'arrêt des machines. >> >> Gaëtan >> >> Le 25/06/2020 à 16:38, Bastien HERMITTE a écrit : >>> Bonjour, >>> >>> Car sinon il va se mettre à jour sur tous les postes d'un coup, ce >>> que je ne veux pas. >>> >>> Cordialement, >>> Bastien >>> >>> Le 25/06/2020 à 16:26, Gaëtan SEGAT a écrit : >>>> >>>> Bonjour Bastien, >>>> >>>> pourquoi le paquet ne peut-il pas être mis sur le dépôt ? >>>> >>>> ---------------------------------------------------------------------------------------------- >>>> >>>> *Gaëtan SEGAT * >>>> Gestionnaire Parc Informatique >>>> Inserm| DRSI Toulouse >>>> CHU Purpan – BP 3048 | 31024 Toulouse cedex 3 >>>> Tél. 05 62 74 83 58 >>>> >>>> <http://www.inserm.fr> >>>> >>>> Le 25/06/2020 à 16:15, Bastien HERMITTE a écrit : >>>>> Bonjour, >>>>> >>>>> Est-il possible d'installer un paquet local, c'est à dire qui a été >>>>> compilé mais pas ajouté au dépôt, depuis un paquet WAPT ? >>>>> >>>>> J'ai essayé ceci, après avoir copié le fichier .wapt dans le paquet : >>>>> /WAPT.install('monpaquet.wapt')/ >>>>> et >>>>> /run(r'wapt-get install monpaquet.wapt')/ >>>>> >>>>> Mais ça ne fonctionne pas. >>>>> >>>>> Je sais c'est un peu farfelu mais je n'ai pas le choix, je ne peux >>>>> pas rajouter le paquet au dépôt. >>>>> Sinon il faudra que je déploie à la main sur tous les postes >>>>> concernés (~50)... >>>>> >>>>> Merci d'avance. >>>>> Bastien >>>>> >>>>> _______________________________________________ >>>>> WAPT mailing list >>>>> WAPT@lists.tranquil.it >>>>> http://lists.tranquil.it/listinfo/wapt >>>> >>>> _______________________________________________ >>>> WAPT mailing list >>>> WAPT@lists.tranquil.it >>>> http://lists.tranquil.it/listinfo/wapt >>> >>> >>> _______________________________________________ >>> WAPT mailing list >>> WAPT@lists.tranquil.it >>> http://lists.tranquil.it/listinfo/wapt >> >> _______________________________________________ >> WAPT mailing list >> WAPT@lists.tranquil.it >> http://lists.tranquil.it/listinfo/wapt > > > _______________________________________________ > WAPT mailing list > WAPT@lists.tranquil.it > http://lists.tranquil.it/listinfo/wapt > _______________________________________________ WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt -- Vincent CARDON, Président Tranquil IT 12 avenue Jules Verne Bâtiment A (Alliance Libre) 44230 Saint Sébastien sur Loire (FRANCE) tel: +33(0)240 975 755 https://www.tranquil.it TVA: FR19443884580 _______________________________________________ WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
Bonjour
Je me bat pour déployer la dernière version du client pulse secure (VPN) via WAPT. Dans mon setup, que j'utilise un run(r'msiexec /norestart /qn /i "PulseSecure.x64.msi"') ou install_msi_if_needed('PulseSecure.x64.msi'), le résultat est le même : FATAL ERROR : CalledProcessErrorOutput: Command 'msiexec /norestart /qn /i "PulseSecure.x64.msi"' returned non-zero exit status 1603.
Je note que sans utiliser WAPT, il s'installe en partie dans C:\Users`user` \AppData\Roaming\Pulse Secure\Setup Client
Alors oui, j'ai bien compris, les podowares c'est pas bien (porte ouverte aux ransomware, etc.), mais concrètement, quand on n'a accès qu'au MSI packagé de la sorte, on fait comment avec WAPT ? A mon avis, si tous les soft commencent à se déployer de cette manière, faudra bien adapter l'outil au soft car il deviendra de plus en plus difficile de faire l'inverse.
Cordialement
Franck
Bonjour Franck,
un run (PulseSecure.x64.msi) ne fonctionne pas ?
Cordialement,
----------------------------------------------------------------------------------------------
*Gaëtan SEGAT * Gestionnaire Parc Informatique Inserm| DRSI Toulouse CHU Purpan – BP 3048 | 31024 Toulouse cedex 3 Tél. 05 62 74 83 58 - 06 35 50 42 80
Le 24/09/2020 à 16:40, Franck ELIE a écrit :
Bonjour
Je me bat pour déployer la dernière version du client pulse secure (VPN) via WAPT. Dans mon setup, que j'utilise un run(r'msiexec /norestart /qn /i "PulseSecure.x64.msi"') ou install_msi_if_needed('PulseSecure.x64.msi'), le résultat est le même : FATAL ERROR : CalledProcessErrorOutput: Command 'msiexec /norestart /qn /i "PulseSecure.x64.msi"' returned non-zero exit status 1603.
Je note que sans utiliser WAPT, il s'installe en partie dans C:\Users`user` \AppData\Roaming\Pulse Secure\Setup Client
Alors oui, j'ai bien compris, les podowares c'est pas bien (porte ouverte aux ransomware, etc.), mais concrètement, quand on n'a accès qu'au MSI packagé de la sorte, on fait comment avec WAPT ? A mon avis, si tous les soft commencent à se déployer de cette manière, faudra bien adapter l'outil au soft car il deviendra de plus en plus difficile de faire l'inverse.
Cordialement
Franck
-- signature
Franck ELIE Administrateur Système et Réseau courriel: franck.elie@cnrs.fr tél : +33(0)2.38.25.76.31 Logo LPC2E http://www.lpc2e.cnrs.fr LPC2E/CNRS, 3A avenue de la Recherche Scientifique, 45071 Orléans Cedex 2, France
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
Bonjour Gaëtan
Non, j'ai certes une fenêtre d'install qui s'iouvre, mais qui se fini par un message d'erreur indiquant un fin prématurée de l'installation. Ceci dit, je ne vois pas trop comment ça pourrait fonctionner vu que, si j'ai bien compris, il s'attend à faire une installation sur un compte utilisateur qui en fait n'a pas de répertoire sur le disque (l'admin du domaine).
Je n'ai pas trouvé de moulinette de conversion pour obtenir un msi qui s’installerait dans c:\Programmes plutôt que dans le répertoire C:\Users ... Si elle existe je suis preneur ++
Cordialement
Franck
Le 24/09/2020 à 17:17, Gaëtan SEGAT a écrit :
Bonjour Franck,
un run (PulseSecure.x64.msi) ne fonctionne pas ?
Cordialement,
*Gaëtan SEGAT * Gestionnaire Parc Informatique Inserm| DRSI Toulouse CHU Purpan – BP 3048 | 31024 Toulouse cedex 3 Tél. 05 62 74 83 58 - 06 35 50 42 80
Le 24/09/2020 à 16:40, Franck ELIE a écrit :
Bonjour
Je me bat pour déployer la dernière version du client pulse secure (VPN) via WAPT. Dans mon setup, que j'utilise un run(r'msiexec /norestart /qn /i "PulseSecure.x64.msi"') ou install_msi_if_needed('PulseSecure.x64.msi'), le résultat est le même : FATAL ERROR : CalledProcessErrorOutput: Command 'msiexec /norestart /qn /i "PulseSecure.x64.msi"' returned non-zero exit status 1603.
Je note que sans utiliser WAPT, il s'installe en partie dans C:\Users`user` \AppData\Roaming\Pulse Secure\Setup Client
Alors oui, j'ai bien compris, les podowares c'est pas bien (porte ouverte aux ransomware, etc.), mais concrètement, quand on n'a accès qu'au MSI packagé de la sorte, on fait comment avec WAPT ? A mon avis, si tous les soft commencent à se déployer de cette manière, faudra bien adapter l'outil au soft car il deviendra de plus en plus difficile de faire l'inverse.
Cordialement
Franck
-- signature
Franck ELIE Administrateur Système et Réseau courriel: franck.elie@cnrs.fr tél : +33(0)2.38.25.76.31 Logo LPC2E http://www.lpc2e.cnrs.fr LPC2E/CNRS, 3A avenue de la Recherche Scientifique, 45071 Orléans Cedex 2, France
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
Bonjour,
La fonction session_setup() permet justement de palier au problème de ces logiciels qui s'installent dans l'environnement utilisateur : https://www.wapt.fr/fr/doc/wapt-create-packages/session-setup/index.html
Cordialement, Bastien
Le 24/09/2020 à 17:37, Franck ELIE a écrit :
Bonjour Gaëtan
Non, j'ai certes une fenêtre d'install qui s'iouvre, mais qui se fini par un message d'erreur indiquant un fin prématurée de l'installation. Ceci dit, je ne vois pas trop comment ça pourrait fonctionner vu que, si j'ai bien compris, il s'attend à faire une installation sur un compte utilisateur qui en fait n'a pas de répertoire sur le disque (l'admin du domaine).
Je n'ai pas trouvé de moulinette de conversion pour obtenir un msi qui s’installerait dans c:\Programmes plutôt que dans le répertoire C:\Users ... Si elle existe je suis preneur ++
Cordialement
Franck
Le 24/09/2020 à 17:17, Gaëtan SEGAT a écrit :
Bonjour Franck,
un run (PulseSecure.x64.msi) ne fonctionne pas ?
Cordialement,
*Gaëtan SEGAT * Gestionnaire Parc Informatique Inserm| DRSI Toulouse CHU Purpan – BP 3048 | 31024 Toulouse cedex 3 Tél. 05 62 74 83 58 - 06 35 50 42 80
Le 24/09/2020 à 16:40, Franck ELIE a écrit :
Bonjour
Je me bat pour déployer la dernière version du client pulse secure (VPN) via WAPT. Dans mon setup, que j'utilise un run(r'msiexec /norestart /qn /i "PulseSecure.x64.msi"') ou install_msi_if_needed('PulseSecure.x64.msi'), le résultat est le même : FATAL ERROR : CalledProcessErrorOutput: Command 'msiexec /norestart /qn /i "PulseSecure.x64.msi"' returned non-zero exit status 1603.
Je note que sans utiliser WAPT, il s'installe en partie dans C:\Users`user` \AppData\Roaming\Pulse Secure\Setup Client
Alors oui, j'ai bien compris, les podowares c'est pas bien (porte ouverte aux ransomware, etc.), mais concrètement, quand on n'a accès qu'au MSI packagé de la sorte, on fait comment avec WAPT ? A mon avis, si tous les soft commencent à se déployer de cette manière, faudra bien adapter l'outil au soft car il deviendra de plus en plus difficile de faire l'inverse.
Cordialement
Franck
-- signature
Franck ELIE Administrateur Système et Réseau courriel: franck.elie@cnrs.fr tél : +33(0)2.38.25.76.31 Logo LPC2E http://www.lpc2e.cnrs.fr LPC2E/CNRS, 3A avenue de la Recherche Scientifique, 45071 Orléans Cedex 2, France
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
Salut Franck,
comme indiqué par Bastien, la fonction session-setup permet de gérer les podoware en environnement utilisateur.
Dans le cas de pulsesecure, il semble qu'il s'installe toujours dans le profil utilisateur (et dire que c'est un logiciel dit de "sécurité"...).
Ceci dit il semble qu'il y a un flag pour une installation systemwide (-mj), mais qu'en fait c'est juste l'installation de l'installeur, et celui ci va être relancé après dans le contexte utilisateur par la suite...
https://docs.pulsesecure.net/WebHelp/PDC/9.1R5/pdc-admin-guide/Deploying/Dep...
On a fait un paquet pour un podoware comme ça il y a quelques semaines. Ca m'attriste à chaque fois de voir le manque de respect de certains développeurs pour les règles de base de la sécurité informatique...
à bientôt,
Denis
Le 24/09/2020 à 17:37, Franck ELIE a écrit :
Bonjour Gaëtan
Non, j'ai certes une fenêtre d'install qui s'iouvre, mais qui se fini par un message d'erreur indiquant un fin prématurée de l'installation. Ceci dit, je ne vois pas trop comment ça pourrait fonctionner vu que, si j'ai bien compris, il s'attend à faire une installation sur un compte utilisateur qui en fait n'a pas de répertoire sur le disque (l'admin du domaine).
Je n'ai pas trouvé de moulinette de conversion pour obtenir un msi qui s’installerait dans c:\Programmes plutôt que dans le répertoire C:\Users ... Si elle existe je suis preneur ++
Cordialement
Franck
Le 24/09/2020 à 17:17, Gaëtan SEGAT a écrit :
Bonjour Franck,
un run (PulseSecure.x64.msi) ne fonctionne pas ?
Cordialement,
*Gaëtan SEGAT * Gestionnaire Parc Informatique Inserm| DRSI Toulouse CHU Purpan – BP 3048 | 31024 Toulouse cedex 3 Tél. 05 62 74 83 58 - 06 35 50 42 80
Le 24/09/2020 à 16:40, Franck ELIE a écrit :
Bonjour
Je me bat pour déployer la dernière version du client pulse secure (VPN) via WAPT. Dans mon setup, que j'utilise un run(r'msiexec /norestart /qn /i "PulseSecure.x64.msi"') ou install_msi_if_needed('PulseSecure.x64.msi'), le résultat est le même : FATAL ERROR : CalledProcessErrorOutput: Command 'msiexec /norestart /qn /i "PulseSecure.x64.msi"' returned non-zero exit status 1603.
Je note que sans utiliser WAPT, il s'installe en partie dans C:\Users`user` \AppData\Roaming\Pulse Secure\Setup Client
Alors oui, j'ai bien compris, les podowares c'est pas bien (porte ouverte aux ransomware, etc.), mais concrètement, quand on n'a accès qu'au MSI packagé de la sorte, on fait comment avec WAPT ? A mon avis, si tous les soft commencent à se déployer de cette manière, faudra bien adapter l'outil au soft car il deviendra de plus en plus difficile de faire l'inverse.
Cordialement
Franck
-- signature
Franck ELIE Administrateur Système et Réseau courriel: franck.elie@cnrs.fr tél : +33(0)2.38.25.76.31 Logo LPC2E http://www.lpc2e.cnrs.fr LPC2E/CNRS, 3A avenue de la Recherche Scientifique, 45071 Orléans Cedex 2, France
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt