Ca n'a peut être rien avoir mais arrive tu à voir la page web "voir status des logiciels" dans le wapt tray
J'ai eu des soucis parfois quand le 127.0.0.1 ne fonctionnai pas sur le client.?
Autre test, dans ton c:\wapt\wapt-get.ini le repo et le serveur wapt t'il bien renseigné ?
Sinon non il faut restart le service wapt
Simon
Le 30/01/2015 17:22, ryoken ryo a écrit :
je te confirme que le service est bien lancé, j'ai l'ai même dans le doute relancé plusieurs fois, mais cela ne fonctionne pas
Le 30 janvier 2015 17:07, Fonteneau Simon <sfonteneau@stemarie-aizenay.fr mailto:sfonteneau@stemarie-aizenay.fr> a écrit :
Le service wapt est t'il bien lancer dans windows sur tes client ? Avec le petit wapttray il faut faire clique droit dessus et "service wapt activé" : Comme sur l'image ci-dessous (ne fait pas attention au flèche) Ou alors tu peu vérifier dans les services windows toi même cmd --> services.msc et regarde si le services wapt et bien lancé. Tien nous au courant Simon Le 30/01/2015 16:02, ryoken ryo a écrit :
oui le parefeu est désactivé et n'y a pas de proxy ou autre entre le client et le serveur ( je suis sur une VLAN totalement isolé) Le 30 janvier 2015 15:47, Fonteneau Simon <sfonteneau@stemarie-aizenay.fr <mailto:sfonteneau@stemarie-aizenay.fr>> a écrit : Bonjour A tu essayer en désactivant le parfeu de windows ? Ou alors il y a t'il un proxy ou un firewall entre ton client et ton serveur ? Simon Le 30/01/2015 15:34, ryoken ryo a écrit :
bonjour, lorsque je souhaite desinstaller un logiciel firefox ou autre j'ai le message suivant : Impossible de joindre e waptservice du poste [errno -2] Name or serice not known alors que l'installation se passe sans aucun problème serveur debian et client windows 7 avez vous une idée svp ? cdt _______________________________________________ WAPT mailing list WAPT@lists.tranquil.it <mailto:WAPT@lists.tranquil.it> http://lists.tranquil.it/listinfo/wapt
_______________________________________________ WAPT mailing list WAPT@lists.tranquil.it <mailto:WAPT@lists.tranquil.it> http://lists.tranquil.it/listinfo/wapt
_______________________________________________ WAPT mailing list WAPT@lists.tranquil.it <mailto:WAPT@lists.tranquil.it> http://lists.tranquil.it/listinfo/wapt
Bonjour Simon et ryoken,
Ca n'a peut être rien avoir mais arrive tu à voir la page web "voir status des logiciels" dans le wapt tray
J'ai eu des soucis parfois quand le 127.0.0.1 ne fonctionnai pas sur le client.?
l'accès à l'interface waptservice en local peut être un indice. Si la conf proxy est pas bonne, ça peut poser des problèmes (par exemple conf proxy sans exceptions pour les réseaux local, ou bien un proxy.pac qui n'exclu pas du proxy les appels à des serveurs locaux).
Dans la console wapt, on peut configurer le proxy pour la gestion du serveur wapt ou pour la récupération des modèles de paquets. La gestion du proxy est beaucoup plus tordu qu'on pourrait le penser au début. Peut être que l'on a oublié quelques exceptions au niveau de l'appel pour la suppression d'un paquet sur une machine.
Si il y a une conf proxy, est ce que vous pourriez désactiver toutes configuration dans ie, relancer le service waptserver et waptservice sur le serveur, puis tester à nouveau. Et si vous avez un windump ou un wireshark sous la main, vérifier que l'appel par bien du serveur directement vers le poste utilisateur.
D'ailleurs pour information, toutes les actions lancées depuis la console sont en fait exécuté par le serveur (la console n'a pas forcément le droit d'accéder aux postes utilisateurs).
à bientôt,
Denis
PS : pour ceux qui sont au FOSDEM, on fait une présentation dimanche matin 9h05 (pour les courageux et les lève-tôt) dans la salle H.1308 (Rolin). N'hésitez pas à venir poser vos questions
Autre test, dans ton c:\wapt\wapt-get.ini le repo et le serveur wapt t'il bien renseigné ?
Sinon non il faut restart le service wapt
Simon
Le 30/01/2015 17:22, ryoken ryo a écrit :
je te confirme que le service est bien lancé, j'ai l'ai même dans le doute relancé plusieurs fois, mais cela ne fonctionne pas
Le 30 janvier 2015 17:07, Fonteneau Simon <sfonteneau@stemarie-aizenay.fr mailto:sfonteneau@stemarie-aizenay.fr> a écrit :
Le service wapt est t'il bien lancer dans windows sur tes client ? Avec le petit wapttray il faut faire clique droit dessus et "service wapt activé" : Comme sur l'image ci-dessous (ne fait pas attention au flèche) Ou alors tu peu vérifier dans les services windows toi même cmd --> services.msc et regarde si le services wapt et bien lancé. Tien nous au courant Simon Le 30/01/2015 16:02, ryoken ryo a écrit :
oui le parefeu est désactivé et n'y a pas de proxy ou autre entre le client et le serveur ( je suis sur une VLAN totalement isolé) Le 30 janvier 2015 15:47, Fonteneau Simon <sfonteneau@stemarie-aizenay.fr <mailto:sfonteneau@stemarie-aizenay.fr>> a écrit : Bonjour A tu essayer en désactivant le parfeu de windows ? Ou alors il y a t'il un proxy ou un firewall entre ton client et ton serveur ? Simon Le 30/01/2015 15:34, ryoken ryo a écrit :
bonjour, lorsque je souhaite desinstaller un logiciel firefox ou autre j'ai le message suivant : Impossible de joindre e waptservice du poste [errno -2] Name or serice not known alors que l'installation se passe sans aucun problème serveur debian et client windows 7 avez vous une idée svp ? cdt _______________________________________________ WAPT mailing list WAPT@lists.tranquil.it <mailto:WAPT@lists.tranquil.it> http://lists.tranquil.it/listinfo/wapt
_______________________________________________ WAPT mailing list WAPT@lists.tranquil.it <mailto:WAPT@lists.tranquil.it> http://lists.tranquil.it/listinfo/wapt
_______________________________________________ WAPT mailing list WAPT@lists.tranquil.it <mailto:WAPT@lists.tranquil.it> http://lists.tranquil.it/listinfo/wapt
Le corps de ce message sera téléchargé à votre demande.
bonjour à tous,
mon problème persiste,
le 127.0.0.1 fonctionne très bien, puisque j'arrive depuis cette page à désinstaller sans problème les applications. le problème apparait uniquement lorsque que je tente des désinstallation depuis l'interface d'administration. les installations depuis l'interface d'administration fonctionne très bien. la conf de mon c:\wapt\wapt-get.ini est bonne
donc là je bloque :(
Le 31 janvier 2015 12:48, Denis Cardon denis.cardon@tranquil-it-systems.fr a écrit :
Bonjour Simon et ryoken,
Ca n'a peut être rien avoir mais arrive tu à voir la page web "voir
status des logiciels" dans le wapt tray
J'ai eu des soucis parfois quand le 127.0.0.1 ne fonctionnai pas sur le client.?
l'accès à l'interface waptservice en local peut être un indice. Si la conf proxy est pas bonne, ça peut poser des problèmes (par exemple conf proxy sans exceptions pour les réseaux local, ou bien un proxy.pac qui n'exclu pas du proxy les appels à des serveurs locaux).
Dans la console wapt, on peut configurer le proxy pour la gestion du serveur wapt ou pour la récupération des modèles de paquets. La gestion du proxy est beaucoup plus tordu qu'on pourrait le penser au début. Peut être que l'on a oublié quelques exceptions au niveau de l'appel pour la suppression d'un paquet sur une machine.
Si il y a une conf proxy, est ce que vous pourriez désactiver toutes configuration dans ie, relancer le service waptserver et waptservice sur le serveur, puis tester à nouveau. Et si vous avez un windump ou un wireshark sous la main, vérifier que l'appel par bien du serveur directement vers le poste utilisateur.
D'ailleurs pour information, toutes les actions lancées depuis la console sont en fait exécuté par le serveur (la console n'a pas forcément le droit d'accéder aux postes utilisateurs).
à bientôt,
Denis
PS : pour ceux qui sont au FOSDEM, on fait une présentation dimanche matin 9h05 (pour les courageux et les lève-tôt) dans la salle H.1308 (Rolin). N'hésitez pas à venir poser vos questions
Autre test, dans ton c:\wapt\wapt-get.ini le repo et le serveur wapt
t'il bien renseigné ?
Sinon non il faut restart le service wapt
Simon
Le 30/01/2015 17:22, ryoken ryo a écrit :
je te confirme que le service est bien lancé, j'ai l'ai même dans le doute relancé plusieurs fois, mais cela ne fonctionne pas
Le 30 janvier 2015 17:07, Fonteneau Simon <sfonteneau@stemarie-aizenay.fr mailto:sfonteneau@stemarie-aizenay.fr> a écrit :
Le service wapt est t'il bien lancer dans windows sur tes client ? Avec le petit wapttray il faut faire clique droit dessus et "service wapt activé" : Comme sur l'image ci-dessous (ne fait pas attention au flèche) Ou alors tu peu vérifier dans les services windows toi même cmd --> services.msc et regarde si le services wapt et bien lancé. Tien nous au courant Simon Le 30/01/2015 16:02, ryoken ryo a écrit :
oui le parefeu est désactivé et n'y a pas de proxy ou autre entre le client et le serveur ( je suis sur une VLAN totalement isolé) Le 30 janvier 2015 15:47, Fonteneau Simon <sfonteneau@stemarie-aizenay.fr <mailto:sfonteneau@stemarie-aizenay.fr>> a écrit : Bonjour A tu essayer en désactivant le parfeu de windows ? Ou alors il y a t'il un proxy ou un firewall entre ton client et ton serveur ? Simon Le 30/01/2015 15:34, ryoken ryo a écrit :
bonjour, lorsque je souhaite desinstaller un logiciel firefox ou autre j'ai le message suivant : Impossible de joindre e waptservice du poste [errno -2] Name or serice not known alors que l'installation se passe sans aucun problème serveur debian et client windows 7 avez vous une idée svp ? cdt _______________________________________________ WAPT mailing list WAPT@lists.tranquil.it <mailto:WAPT@lists.tranquil.it> http://lists.tranquil.it/listinfo/wapt
_______________________________________________ WAPT mailing list WAPT@lists.tranquil.it <mailto:WAPT@lists.tranquil.it> http://lists.tranquil.it/listinfo/wapt
_______________________________________________ WAPT mailing list WAPT@lists.tranquil.it <mailto:WAPT@lists.tranquil.it> http://lists.tranquil.it/listinfo/wapt
Le corps de ce message sera téléchargé à votre demande.
-- Denis Cardon Tranquil IT Systems Les Espaces Jules Verne, bâtiment A 12 avenue Jules Verne 44230 Saint Sébastien sur Loire tel : +33 (0) 2.40.97.57.55 http://www.tranquil-it-systems.fr
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
Bonjour, Si dans la console l'IP du client est renvoyée sous la forme d'un tableau ['192.168.1.20'] et pas simplement 192.168.1.20, je vois d'où vient le problème. Pour contourner immédiatement le problème, il faut créer un enregistrement A ou CNAME dans le zone DNS avec le nom wapt.mondomaine.loc qui pointe sur le serveur wapt.
Je vais corriger cela aujourd'hui.
Hubert
Le 02/02/2015 08:39, ryoken ryo a écrit :
bonjour à tous,
mon problème persiste,
le 127.0.0.1 fonctionne très bien, puisque j'arrive depuis cette page à désinstaller sans problème les applications. le problème apparait uniquement lorsque que je tente des désinstallation depuis l'interface d'administration. les installations depuis l'interface d'administration fonctionne très bien. la conf de mon c:\wapt\wapt-get.ini est bonne
donc là je bloque :(