Bonjour,
Résumé : - Est-il possible d'installer l'agent waptagent.exe de sorte de déployer les paquets en direct, sans attendre un reboot ? - Si oui, je fais peut-être une confusion, mais à quelle option d'installation dois-je faire référence dans l’installation waptagent.exe ?
------------- Lorsque j'installe un waptagent, il me semble que je peux soit :
- exporter le paquet depuis la console - télécharger le paquet depuis l'interface web du serveur
A priori ces deux paquets sont générés soit par le serveur, soit par la console.
J'ai un petit soucis avec les paquets générés :
A priori, je n'ai plus l'icone de notification du push des paquets en direct.
Est-ce que je dois passer par innosetup comme décrit ici : https://dev.tranquil.it/wiki/WAPT_-_Cr%C3%A9ation_d%27un_installeur_waptsetu...
Et personnaliser waptagent.exe ?
Parce que lorsque je tente les options de l'installation silencieuse https://dev.tranquil.it/wiki/WAPT_-_Installation_silencieuse/en
- InstallTray : Installer le programme d'icone de Wapt (désactivé par défaut) - autorunTray : Install the program icon WAPT (disabled by default)
Le service est bien présent, mais plus la notification push.
D'autre part (mais je peux au besoin créer un message avec un autre sujet) Que précaunisez-vous pour l'installation d'InnoSetup ? Dois elle se faire sur la console ? ou le Serveur ? Depuis la console lors d'un : wapt-get install tis-innosetup
Le mot demandé est celui du waptservice User, à priori ce n'est pas celui que j'utilise pour accèder à la console, ni mon mot de passe user ad.
Autre question mot de passe, lorsque je veux faire une action dans : http://127.0.0.1:8088 Quel mot de passe dois-je fournir ?
Par avance, merci pour vos réponses, Bien cordialement,
---------------- Config Serveur : W2K8 serveur, wapt 1.3.8 Config Console : W7, wapt 1.3.8 Config Client : W7, wapt 1.3.8
Bonjour,
Un petit UP, je sais que vous êtes à fond sur la dernière release, mais au cas ou ma question est passée à l'as.
Merci,
Le 9 novembre 2016 à 08:34, Eric Sanders eric27sanders@gmail.com a écrit :
Bonjour,
Résumé :
- Est-il possible d'installer l'agent waptagent.exe de sorte de déployer
les paquets en direct, sans attendre un reboot ?
- Si oui, je fais peut-être une confusion, mais à quelle option
d'installation dois-je faire référence dans l’installation waptagent.exe ?
Lorsque j'installe un waptagent, il me semble que je peux soit :
- exporter le paquet depuis la console
- télécharger le paquet depuis l'interface web du serveur
A priori ces deux paquets sont générés soit par le serveur, soit par la console.
J'ai un petit soucis avec les paquets générés :
A priori, je n'ai plus l'icone de notification du push des paquets en direct.
Est-ce que je dois passer par innosetup comme décrit ici : https://dev.tranquil.it/wiki/WAPT_-_Cr%C3%A9ation_d%27un_ installeur_waptsetup.exe_personnalis%C3%A9_v2
Et personnaliser waptagent.exe ?
Parce que lorsque je tente les options de l'installation silencieuse https://dev.tranquil.it/wiki/WAPT_-_Installation_silencieuse/en
- InstallTray : Installer le programme d'icone de Wapt (désactivé par
défaut)
- autorunTray : Install the program icon WAPT (disabled by default)
Le service est bien présent, mais plus la notification push.
D'autre part (mais je peux au besoin créer un message avec un autre sujet) Que précaunisez-vous pour l'installation d'InnoSetup ? Dois elle se faire sur la console ? ou le Serveur ? Depuis la console lors d'un : wapt-get install tis-innosetup
Le mot demandé est celui du waptservice User, à priori ce n'est pas celui que j'utilise pour accèder à la console, ni mon mot de passe user ad.
Autre question mot de passe, lorsque je veux faire une action dans : http://127.0.0.1:8088 Quel mot de passe dois-je fournir ?
Par avance, merci pour vos réponses, Bien cordialement,
Config Serveur : W2K8 serveur, wapt 1.3.8 Config Console : W7, wapt 1.3.8 Config Client : W7, wapt 1.3.8
Le 12/11/2016 à 09:58, Eric Sanders a écrit :
Bonjour,
Bonjour Eric
Un petit UP, je sais que vous êtes à fond sur la dernière release, mais au cas ou ma question est passée à l'as.
Merci,
Le 9 novembre 2016 à 08:34, Eric Sanders <eric27sanders@gmail.com mailto:eric27sanders@gmail.com> a écrit :
Bonjour, Résumé : - Est-il possible d'installer l'agent waptagent.exe de sorte de déployer les paquets en direct, sans attendre un reboot ?
Bonjour,
Oui le sujet a été traité ici :
https://forum.tranquil.it/viewtopic.php?f=13&t=464&hilit=Ajouter+les...
En revanche, *j’insiste sur ce point* ! Si l'agent est déployé en gpo (script de démarrage ordinateur) (waptdeploy) Vous devez absolument modifier la valeur preshutdowntimeout et la gpo MaxGPOScriptWait, car si vos installations dur plus de 15 minutes, l'installation plantera irrémédiablement.
- Si oui, je fais peut-être une confusion, mais à quelle option d'installation dois-je faire référence dans l’installation waptagent.exe ?
Ce n'est, pour le moment, pas quelque chose de standardisé.
------------- Lorsque j'installe un waptagent, il me semble que je peux soit : - exporter le paquet depuis la console - télécharger le paquet depuis l'interface web du serveur A priori ces deux paquets sont générés soit par le serveur, soit par la console. J'ai un petit soucis avec les paquets générés : A priori, je n'ai plus l'icone de notification du push des paquets en direct. Est-ce que je dois passer par innosetup comme décrit ici : https://dev.tranquil.it/wiki/WAPT_-_Cr%C3%A9ation_d'un_installeur_waptsetup.exe_personnalis%C3%A9_v2 <https://dev.tranquil.it/wiki/WAPT_-_Cr%C3%A9ation_d%27un_installeur_waptsetup.exe_personnalis%C3%A9_v2>
La méthode donnée dans le lien au-dessus reviens au même.
Et personnaliser waptagent.exe ? Parce que lorsque je tente les options de l'installation silencieuse https://dev.tranquil.it/wiki/WAPT_-_Installation_silencieuse/en <https://dev.tranquil.it/wiki/WAPT_-_Installation_silencieuse/en> * InstallTray : Installer le programme d'icone de Wapt (désactivé par défaut) * autorunTray : Install the program icon WAPT (disabled by default) Le service est bien présent, mais plus la notification push.
Je vais refaire un test de mon côté, pour voir.
D'autre part (mais je peux au besoin créer un message avec un autre sujet)
C'est mieux effectivement de créer un sujet par problèmes.
Que précaunisez-vous pour l'installation d'InnoSetup ? Dois elle se faire sur la console ? ou le Serveur ? Depuis la console lors d'un : wapt-get install tis-innosetup Le mot demandé est celui du waptservice User, à priori ce n'est pas celui que j'utilise pour accèder à la console, ni mon mot de passe user ad. Autre question mot de passe, lorsque je veux faire une action dans : http://127.0.0.1:8088 Quel mot de passe dois-je fournir ?
Wapt autorise par défaut les administrateurs de la machine à installer des logiciels, si vous avez un utilisateur user1 administrateur de la machine, alors il sera autorisé à lancer une installation lors d'un wapt-get install et sur http://127.0.0.1:8088 avec son identifiant et son mot de passe.
Par avance, merci pour vos réponses, Bien cordialement, ---------------- Config Serveur : W2K8 serveur, wapt 1.3.8 Config Console : W7, wapt 1.3.8 Config Client : W7, wapt 1.3.8
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
Le 12/11/2016 à 12:02, Lesfourmisduweb a écrit :
Le 12/11/2016 à 09:58, Eric Sanders a écrit :
Bonjour,
Bonjour Eric
Un petit UP, je sais que vous êtes à fond sur la dernière release, mais au cas ou ma question est passée à l'as.
Merci,
Le 9 novembre 2016 à 08:34, Eric Sanders <eric27sanders@gmail.com mailto:eric27sanders@gmail.com> a écrit :
Bonjour, Résumé : - Est-il possible d'installer l'agent waptagent.exe de sorte de déployer les paquets en direct, sans attendre un reboot ?
Bonjour,
Oui le sujet a été traité ici :
https://forum.tranquil.it/viewtopic.php?f=13&t=464&hilit=Ajouter+les...
En revanche, *j’insiste sur ce point* ! Si l'agent est déployé en gpo (script de démarrage ordinateur) (waptdeploy) Vous devez absolument modifier la valeur preshutdowntimeout et la gpo MaxGPOScriptWait, car si vos installations dur plus de 15 minutes, l'installation plantera irrémédiablement.
- Si oui, je fais peut-être une confusion, mais à quelle option d'installation dois-je faire référence dans l’installation waptagent.exe ?
Ce n'est, pour le moment, pas quelque chose de standardisé.
Pour automatiser la chose, vous pouvez par exemple rajouter une clause [run] dans waptsetup.iss avant de compiler votre installeur waptagent personnalisé. Ouvrir C:\WAPT\waptsetup\waptsetup.iss avec notepad(++) et rajouter dans la section [Run] (en remplaçant *monpaquetbase* par le nom du paquet que vous voulez installer systématiquement
Filename: "{app}\wapt-get.exe"; Parameters: "install *monpaquetbase*"; Flags: runhidden; StatusMsg: "Installation paquets de base"; Description: "Installation paquets de base"
Comme le dit SImon, il faut aussi fixer le MaxGPOScriptWait. Si vous êtes avec la wapt >= 1.3.8 rajouter une ligne dans la section [ini] de waptsetup.iss :
Filename: {app}\wapt-get.ini; Section: global; Key: max_gpo_script_wait; String: "180";
Ensuite recréez votre agent personnalisé.
Il faut noter que cette méthode ne créera pas de paquet machine pour le poste en question, et donc pas de dépendance forte. Si ensuite on désinstalle le paquet *monpaquetbase* ou une de ses dépendances, il ne se réinstallera pas au prochain upgrade comme cela serait le cas en créant un paquet machine dûment signé.
------------- Lorsque j'installe un waptagent, il me semble que je peux soit : - exporter le paquet depuis la console - télécharger le paquet depuis l'interface web du serveur A priori ces deux paquets sont générés soit par le serveur, soit par la console. J'ai un petit soucis avec les paquets générés : A priori, je n'ai plus l'icone de notification du push des paquets en direct. Est-ce que je dois passer par innosetup comme décrit ici : https://dev.tranquil.it/wiki/WAPT_-_Cr%C3%A9ation_d'un_installeur_waptsetup.exe_personnalis%C3%A9_v2 <https://dev.tranquil.it/wiki/WAPT_-_Cr%C3%A9ation_d%27un_installeur_waptsetup.exe_personnalis%C3%A9_v2>
La méthode donnée dans le lien au-dessus reviens au même.
Et personnaliser waptagent.exe ? Parce que lorsque je tente les options de l'installation silencieuse https://dev.tranquil.it/wiki/WAPT_-_Installation_silencieuse/en <https://dev.tranquil.it/wiki/WAPT_-_Installation_silencieuse/en> * InstallTray : Installer le programme d'icone de Wapt (désactivé par défaut) * autorunTray : Install the program icon WAPT (disabled by default) Le service est bien présent, mais plus la notification push.
Je vais refaire un test de mon côté, pour voir.
D'autre part (mais je peux au besoin créer un message avec un autre sujet)
C'est mieux effectivement de créer un sujet par problèmes.
Que précaunisez-vous pour l'installation d'InnoSetup ? Dois elle se faire sur la console ? ou le Serveur ? Depuis la console lors d'un : wapt-get install tis-innosetup Le mot demandé est celui du waptservice User, à priori ce n'est pas celui que j'utilise pour accèder à la console, ni mon mot de passe user ad. Autre question mot de passe, lorsque je veux faire une action dans : http://127.0.0.1:8088 Quel mot de passe dois-je fournir ?
Wapt autorise par défaut les administrateurs de la machine à installer des logiciels, si vous avez un utilisateur user1 administrateur de la machine, alors il sera autorisé à lancer une installation lors d'un wapt-get install et sur http://127.0.0.1:8088 avec son identifiant et son mot de passe.
Par avance, merci pour vos réponses, Bien cordialement, ---------------- Config Serveur : W2K8 serveur, wapt 1.3.8 Config Console : W7, wapt 1.3.8 Config Client : W7, wapt 1.3.8
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt