Bonjour,
J'ai un problème d'accès suite à une installation sur un serveur NAS Debian.
J'ai pris soins de libérer les ports 80, 443 et 8080 avant l'installation. L'installation c'est correctement déroulé mais j'ai un retour erreur lorsque je j'essaie d'accéder au serveur WAPT. Après quelques recherche sur le net, modifier les temps d'attente du proxy pourrait résoudre mon problème. C'est pour l'instant la seule piste que j'ai sous le coude.
Auriez vous des pistes de recherche ou des commandes pouvant m'aider sur la résolution de mon problème ???
==================================================== *Page : https://10.111.15.2/*
Proxy Error
The proxy server received an invalid response from an upstream server. The proxy server could not handle the request /GET / https://10.111.15.2//.
Reason: *Error reading from remote server*
------------------------------------------------------------------------ Apache/2.2.22 (Debian) Server at 10.111.15.2 Port 443
====================================================
Bonjour Joel,
J'ai un problème d'accès suite à une installation sur un serveur NAS Debian.
J'ai pris soins de libérer les ports 80, 443 et 8080 avant l'installation. L'installation c'est correctement déroulé mais j'ai un retour erreur lorsque je j'essaie d'accéder au serveur WAPT. Après quelques recherche sur le net, modifier les temps d'attente du proxy pourrait résoudre mon problème. C'est pour l'instant la seule piste que j'ai sous le coude.
Auriez vous des pistes de recherche ou des commandes pouvant m'aider sur la résolution de mon problème ???
==================================================== *Page : https://10.111.15.2/*
Proxy Error
The proxy server received an invalid response from an upstream server. The proxy server could not handle the request /GET / https://10.111.15.2//.
Reason: *Error reading from remote server*
Apache/2.2.22 (Debian) Server at 10.111.15.2 Port 443
Quel est la version de apache, votre NAS fait tourner une version wheezy de debian, donc ça devrait être bon de ce côté là.
Le message sous-entend que apache n'a pas pu contacter le service uwsgi/python. Il faudrait regarder les log /var/log/waptserver.log pour vérifier si il n'y a pas un message d'erreur.
Pour tester la partie python indépendamment du reste, vous pouvez lancer le serveur python avec la commande suivante: /etc/init.d/waptserver stop python /opt/wapt/waptserver/waptserver.py
Par défaut le service uwsgi et le python n'écoute uniquement sur localhost. Une manière de tester la partie python sans apache est de modifier la ligne 2009, vous remplacer 127.0.0.1 par 0.0.0.0: server = Rocket(('0.0.0.0', port), 'wsgi', {"wsgi_app":app})
Ainsi le serveur python sera accessible directement sur le port 8080 depuis votre poste d'administration sans passer par apache.
Cordialement,
Denis Cardon
====================================================
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
Je viens de refaire une installation toute neuve de Debian (Jessie) avec wapt uniquement et j'ai le même problème. J'utilise Apache 2.4.10 et voici le contenu du log
*** Starting uWSGI 2.0.7-debian (64bit) on [Wed May 20 10:08:04 2015] *** compiled with version: 4.9.1 on 25 October 2014 19:17:54 os: Linux-3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt9-3~deb8u1 (2015-04-24) nodename: srv-omv machine: x86_64 clock source: unix pcre jit disabled detected number of CPU cores: 4 current working directory: /home/administrateur writing pidfile to /var/run/waptserver.pid detected binary path: /usr/bin/uwsgi-core setgid() to 33 setuid() to 118 your processes number limit is 31835 your memory page size is 4096 bytes detected max file descriptor number: 65536 lock engine: pthread robust mutexes thunder lock: disabled (you can enable it with --thunder-lock) uwsgi socket 0 bound to TCP address 127.0.0.1:8080 fd 3 Python version: 2.7.9 (default, Mar 1 2015, 13:01:26) [GCC 4.9.2] Python main interpreter initialized at 0x143f680 python threads support enabled your server socket listen backlog is limited to 100 connections your mercy for graceful operations on workers is 60 seconds mapped 1237056 bytes (1208 KB) for 16 cores *** Operational MODE: preforking *** WSGI app 0 (mountpoint='') ready in 1 seconds on interpreter 0x143f680 pid: 6547 (default app) *** uWSGI is running in multiple interpreter mode *** spawned uWSGI master process (pid: 6547) spawned uWSGI worker 1 (pid: 6678, cores: 1) spawned uWSGI worker 2 (pid: 6679, cores: 1) spawned uWSGI worker 3 (pid: 6680, cores: 1) spawned uWSGI worker 4 (pid: 6681, cores: 1) spawned uWSGI worker 5 (pid: 6682, cores: 1) spawned uWSGI worker 6 (pid: 6683, cores: 1) spawned uWSGI worker 7 (pid: 6684, cores: 1) spawned uWSGI worker 8 (pid: 6685, cores: 1) spawned uWSGI worker 9 (pid: 6686, cores: 1) spawned uWSGI worker 10 (pid: 6687, cores: 1) spawned uWSGI worker 11 (pid: 6688, cores: 1) spawned uWSGI worker 12 (pid: 6689, cores: 1) spawned uWSGI worker 13 (pid: 6690, cores: 1) spawned uWSGI worker 14 (pid: 6691, cores: 1) spawned uWSGI worker 15 (pid: 6692, cores: 1) spawned uWSGI worker 16 (pid: 6693, cores: 1) Gracefully killing worker 7 (pid: 6684)... *** Starting uWSGI 2.0.7-debian (64bit) on [Wed May 20 10:12:48 2015] *** compiled with version: 4.9.1 on 25 October 2014 19:17:54 os: Linux-3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt9-3~deb8u1 (2015-04-24) nodename: srv-omv machine: x86_64 clock source: unix pcre jit disabled detected number of CPU cores: 4 current working directory: /
Et voici l'erreur que j'obtiens à l'adresse https://10.111.XXX.XXX
Proxy Error
The proxy server received an invalid response from an upstream server. The proxy server could not handle the request /GET / https://10.111.15.2//.
Reason: *Error reading from remote server*
------------------------------------------------------------------------ Apache/2.4.10 (Debian) Server at 10.111.15.2 Port 443
Le 20/05/2015 09:27, Denis Cardon a écrit :
Bonjour Joel,
J'ai un problème d'accès suite à une installation sur un serveur NAS Debian.
J'ai pris soins de libérer les ports 80, 443 et 8080 avant l'installation. L'installation c'est correctement déroulé mais j'ai un retour erreur lorsque je j'essaie d'accéder au serveur WAPT. Après quelques recherche sur le net, modifier les temps d'attente du proxy pourrait résoudre mon problème. C'est pour l'instant la seule piste que j'ai sous le coude.
Auriez vous des pistes de recherche ou des commandes pouvant m'aider sur la résolution de mon problème ???
==================================================== *Page : https://10.111.15.2/*
Proxy Error
The proxy server received an invalid response from an upstream server. The proxy server could not handle the request /GET / https://10.111.15.2//.
Reason: *Error reading from remote server*
Apache/2.2.22 (Debian) Server at 10.111.15.2 Port 443
Quel est la version de apache, votre NAS fait tourner une version wheezy de debian, donc ça devrait être bon de ce côté là.
Le message sous-entend que apache n'a pas pu contacter le service uwsgi/python. Il faudrait regarder les log /var/log/waptserver.log pour vérifier si il n'y a pas un message d'erreur.
Pour tester la partie python indépendamment du reste, vous pouvez lancer le serveur python avec la commande suivante: /etc/init.d/waptserver stop python /opt/wapt/waptserver/waptserver.py
Par défaut le service uwsgi et le python n'écoute uniquement sur localhost. Une manière de tester la partie python sans apache est de modifier la ligne 2009, vous remplacer 127.0.0.1 par 0.0.0.0: server = Rocket(('0.0.0.0', port), 'wsgi', {"wsgi_app":app})
Ainsi le serveur python sera accessible directement sur le port 8080 depuis votre poste d'administration sans passer par apache.
Cordialement,
Denis Cardon
====================================================
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt