Bonjour,
Existe-t-il un moyen de « cacher » un paquet afin quil ne soit pas visible de tous les utilisateurs et pas visible non plus dans linterface localhost:8088/list mais que en sachant le nom exacte il soit tout de même possible de linstaller, cela serait pratique lors du développement dun paquet ou pour les paquets avec dépendance, pour la copie de fichiers avant linstallation par exemple, le paquet « copy de fichiers » na pas besoin dêtre visible, puisque inutile, voir « dangereux » tout seul.
Merci pour votre aide
Cordialement Patrick
Bonjour,
Je connais 2 moyens :
- mettre par exemple "dev" dans la section maturity du fichier de control du paquet concerné : celui-ci ne sera vu que par les clients ayant dans le champ maturities "dev" de leur wapt-get.ini. fichier control champ "maturity" : https://www.wapt.fr/fr/doc/wapt-create-packages/wapt-package-structure/index... fichier wapt-get.ini champ "maturities" : https://www.wapt.fr/fr/doc/wapt-configuration/ini-file/wapt-get.ini.html
- ou à l'ancienne, vous ajoutez un répertoire "dev" dans le www de votre serveur wapt et vous faite pointer le repo_url de vos postes de dev vers celui-ci.
Sébastien.
Le mer. 20 mars 2019 à 12:07, Patrick BERTHELOT patrick.berthelot@ipht.fr a écrit :
Bonjour,
Existe-t-il un moyen de « cacher » un paquet afin qu’il ne soit pas visible de tous les utilisateurs et pas visible non plus dans l’interface localhost:8088/list mais que en sachant le nom exacte il soit tout de même possible de l’installer, cela serait pratique lors du développement d’un paquet ou pour les paquets avec dépendance, pour la copie de fichiers avant l’installation par exemple, le paquet « copy de fichiers » n’a pas besoin d’être visible, puisque inutile, voir « dangereux » tout seul.
Merci pour votre aide
Cordialement Patrick
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
Bonjour,
je profite de la question de cacher les paquets, également.. Par exemple, est-il possible de cacher les paquets "à licence" ?
Par exemple : Je déploie, acrobatPro (avec licence) sur des postes mais je ne souhaite pas que le paquet soit visible/accessibles par les autres postes (par exemple avec localhost:8088/list). Si le met à jour mon paquet acrobatPro, il faut également que le paquet se mette à jour automatiquement sur les postes concernés par le paquet.
Autre demande, je souhaite partager mon dépôt de paquets avec un collègue dans une autre structure, mais le souhaite pas que ce même collègue puisse voir mes paquets à licence type acrobatPro, cela est-il possible ?
Merci d'avance,
Cordialement,
Alexis
Le 20/03/2019 à 13:02, sainthilairederiez mairie a écrit :
Bonjour,
Je connais 2 moyens :
- mettre par exemple "dev" dans la section maturity du fichier de
control du paquet concerné : celui-ci ne sera vu que par les clients ayant dans le champ maturities "dev" de leur wapt-get.ini. fichier control champ "maturity" : https://www.wapt.fr/fr/doc/wapt-create-packages/wapt-package-structure/index... fichier wapt-get.ini champ "maturities" : https://www.wapt.fr/fr/doc/wapt-configuration/ini-file/wapt-get.ini.html
- ou à l'ancienne, vous ajoutez un répertoire "dev" dans le www de
votre serveur wapt et vous faite pointer le repo_url de vos postes de dev vers celui-ci.
Sébastien.
Le mer. 20 mars 2019 à 12:07, Patrick BERTHELOT <patrick.berthelot@ipht.fr mailto:patrick.berthelot@ipht.fr> a écrit :
Bonjour, Existe-t-il un moyen de « cacher » un paquet afin qu’il ne soit pas visible de tous les utilisateurs et pas visible non plus dans l’interface localhost:8088/list mais que en sachant le nom exacte il soit tout de même possible de l’installer, cela serait pratique lors du développement d’un paquet ou pour les paquets avec dépendance, pour la copie de fichiers avant l’installation par exemple, le paquet « copy de fichiers » n’a pas besoin d’être visible, puisque inutile, voir « dangereux » tout seul. Merci pour votre aide Cordialement Patrick _______________________________________________ WAPT mailing list WAPT@lists.tranquil.it <mailto:WAPT@lists.tranquil.it> http://lists.tranquil.it/listinfo/wapt
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
Bonjour,
Je viens de faire quelques tests en utilisant le paramètre « Maturity », ça permet de cacher un paquet aux clients qui ne l’ont pas déclarer dans wapt-get.ini, on peut tout de même « pousser » le paquet depuis la console, j’ai par contre un problème quand j’ai une dépendance avec un paquet cache ?
Je pense que le fonctionnement doit être identique avec plusieurs dépôt ?
Cordialement Patrick
De : WAPT wapt-bounces@lists.tranquil.it De la part de Alexis Boulet Envoyé : jeudi 21 mars 2019 12:57 À : wapt@lists.tranquil.it Objet : Re: [Wapt] cacher des paquets
Bonjour,
je profite de la question de cacher les paquets, également.. Par exemple, est-il possible de cacher les paquets "à licence" ?
Par exemple : Je déploie, acrobatPro (avec licence) sur des postes mais je ne souhaite pas que le paquet soit visible/accessibles par les autres postes (par exemple avec localhost:8088/list). Si le met à jour mon paquet acrobatPro, il faut également que le paquet se mette à jour automatiquement sur les postes concernés par le paquet.
Autre demande, je souhaite partager mon dépôt de paquets avec un collègue dans une autre structure, mais le souhaite pas que ce même collègue puisse voir mes paquets à licence type acrobatPro, cela est-il possible ?
Merci d'avance,
Cordialement,
Alexis
Le 20/03/2019 à 13:02, sainthilairederiez mairie a écrit :
Bonjour,
Je connais 2 moyens :
- mettre par exemple "dev" dans la section maturity du fichier de control du paquet concerné :
celui-ci ne sera vu que par les clients ayant dans le champ maturities "dev" de leur wapt-get.ini.
fichier control champ "maturity" : https://www.wapt.fr/fr/doc/wapt-create-packages/wapt-package-structure/index...
fichier wapt-get.ini champ "maturities" : https://www.wapt.fr/fr/doc/wapt-configuration/ini-file/wapt-get.ini.html
- ou à l'ancienne, vous ajoutez un répertoire "dev" dans le www de votre serveur wapt et vous faite pointer le repo_url de vos postes de dev vers celui-ci.
Sébastien.
Le mer. 20 mars 2019 à 12:07, Patrick BERTHELOT <patrick.berthelot@ipht.fr mailto:patrick.berthelot@ipht.fr > a écrit :
Bonjour,
Existe-t-il un moyen de « cacher » un paquet afin qu’il ne soit pas visible de tous les utilisateurs et pas visible non plus dans l’interface localhost:8088/list mais que en sachant le nom exacte il soit tout de même possible de l’installer, cela serait pratique lors du développement d’un paquet ou pour les paquets avec dépendance, pour la copie de fichiers avant l’installation par exemple, le paquet « copy de fichiers » n’a pas besoin d’être visible, puisque inutile, voir « dangereux » tout seul.
Merci pour votre aide
Cordialement Patrick
_______________________________________________ WAPT mailing list WAPT@lists.tranquil.it mailto:WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
_______________________________________________ WAPT mailing list WAPT@lists.tranquil.it mailto:WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
Pour masquer des mise à jour dans localhost:8088/list en fonction de l'utilisateur connectée c'est uniquement en version entreprise:
https://www.youtube.com/watch?v=znTBJv3vDKM
Attention par défaut les administrateurs peuvent voir tous les logiciels (ils sont de toute façon administrateur du poste ils fonts ce qu'ils veulent...)
/Autre demande, je souhaite partager mon dépôt de paquets avec un collègue dans une autre structure, mais le souhaite pas que ce même collègue puisse voir mes paquets à licence type acrobatPro, cela est-il possible ?/
Plus globalement pour les logiciels a licences il faut voir les chose autrement.
La licence acrobatPro ne doit pas être en clair dans le paquet le paquet. Je vous conseille donc de lire ceci:
https://www.wapt.fr/fr/doc/wapt-create-packages/secret-data/encrypt-paquet.h...
Simon
Le 22/03/2019 à 12:13, Patrick BERTHELOT a écrit :
Boulet Alexis
Bonjour,
Je viens de faire quelques tests en utilisant le paramètre « Maturity », ça permet de cacher un paquet aux clients qui ne l’ont pas déclarer dans wapt-get.ini, on peut tout de même « pousser » le paquet depuis la console, j’ai par contre un problème quand j’ai une dépendance avec un paquet cache ?
Je pense que le fonctionnement doit être identique avec plusieurs dépôt ?
Cordialement Patrick
*De :*WAPT wapt-bounces@lists.tranquil.it *De la part de* Alexis Boulet *Envoyé :* jeudi 21 mars 2019 12:57 *À :* wapt@lists.tranquil.it *Objet :* Re: [Wapt] cacher des paquets
Bonjour,
je profite de la question de cacher les paquets, également.. Par exemple, est-il possible de cacher les paquets "à licence" ?
Par exemple : Je déploie, acrobatPro (avec licence) sur des postes mais je ne souhaite pas que le paquet soit visible/accessibles par les autres postes (par exemple avec localhost:8088/list). Si le met à jour mon paquet acrobatPro, il faut également que le paquet se mette à jour automatiquement sur les postes concernés par le paquet.
Autre demande, je souhaite partager mon dépôt de paquets avec un collègue dans une autre structure, mais le souhaite pas que ce même collègue puisse voir mes paquets à licence type acrobatPro, cela est-il possible ?
Merci d'avance,
Cordialement,
Alexis
Le 20/03/2019 à 13:02, sainthilairederiez mairie a écrit :
Bonjour, Je connais 2 moyens : - mettre par exemple "dev" dans la section maturity du fichier de control du paquet concerné : celui-ci ne sera vu que par les clients ayant dans le champ maturities "dev" de leur wapt-get.ini. fichier control champ "maturity" : https://www.wapt.fr/fr/doc/wapt-create-packages/wapt-package-structure/index.html fichier wapt-get.ini champ "maturities" : https://www.wapt.fr/fr/doc/wapt-configuration/ini-file/wapt-get.ini.html - ou à l'ancienne, vous ajoutez un répertoire "dev" dans le www de votre serveur wapt et vous faite pointer le repo_url de vos postes de dev vers celui-ci. Sébastien. Le mer. 20 mars 2019 à 12:07, Patrick BERTHELOT <patrick.berthelot@ipht.fr <mailto:patrick.berthelot@ipht.fr>> a écrit : Bonjour, Existe-t-il un moyen de « cacher » un paquet afin qu’il ne soit pas visible de tous les utilisateurs et pas visible non plus dans l’interface localhost:8088/list mais que en sachant le nom exacte il soit tout de même possible de l’installer, cela serait pratique lors du développement d’un paquet ou pour les paquets avec dépendance, pour la copie de fichiers avant l’installation par exemple, le paquet « copy de fichiers » n’a pas besoin d’être visible, puisque inutile, voir « dangereux » tout seul. Merci pour votre aide Cordialement Patrick _______________________________________________ WAPT mailing list WAPT@lists.tranquil.it <mailto:WAPT@lists.tranquil.it> http://lists.tranquil.it/listinfo/wapt _______________________________________________ WAPT mailing list WAPT@lists.tranquil.it <mailto:WAPT@lists.tranquil.it> http://lists.tranquil.it/listinfo/wapt
--
mbr
*Alexis Boulet* Assistant Ingénieur Service Informatique Tél. +33 2 32 95 36 32
coria
*UMR 6614 CORIA* Université de Rouen Site Universitaire du Madrillet - BP 12 76801 Saint Etienne du Rouvray cedex Tél. +33 2 32 95 36 00 - Fax +33 2 32 91 04 85 www.coria.fr http://www.coria.fr
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
Merci Simon pour votre réponse,
En effet, je vais commencer à m'intéresser à la version entreprise dans ce cas :)
Cependant, je n'ai aucune licence en clair à proprement parler dans mes paquets. En prenant l'exemple de AcrobatPro, la licence est intégrée au MSI d’installation (CF adobe customisation Wizard). Ce qui signifie, qu'un utilisateur ayant accès au package ne verra pas la licence en clair
mais pourra utiliser l'installeur, contenant la licence. C'est pour cela que je parlais de cacher totalement un paquet...
Alexis
Le 23/03/2019 à 12:27, Simon Fonteneau a écrit :
Pour masquer des mise à jour dans localhost:8088/list en fonction de l'utilisateur connectée c'est uniquement en version entreprise:
https://www.youtube.com/watch?v=znTBJv3vDKM
Attention par défaut les administrateurs peuvent voir tous les logiciels (ils sont de toute façon administrateur du poste ils fonts ce qu'ils veulent...)
/Autre demande, je souhaite partager mon dépôt de paquets avec un collègue dans une autre structure, mais le souhaite pas que ce même collègue puisse voir mes paquets à licence type acrobatPro, cela est-il possible ?/
Plus globalement pour les logiciels a licences il faut voir les chose autrement.
La licence acrobatPro ne doit pas être en clair dans le paquet le paquet. Je vous conseille donc de lire ceci:
https://www.wapt.fr/fr/doc/wapt-create-packages/secret-data/encrypt-paquet.h...
Simon
Le 22/03/2019 à 12:13, Patrick BERTHELOT a écrit :
Boulet Alexis
Bonjour,
Je viens de faire quelques tests en utilisant le paramètre « Maturity », ça permet de cacher un paquet aux clients qui ne l’ont pas déclarer dans wapt-get.ini, on peut tout de même « pousser » le paquet depuis la console, j’ai par contre un problème quand j’ai une dépendance avec un paquet cache ?
Je pense que le fonctionnement doit être identique avec plusieurs dépôt ?
Cordialement Patrick
*De :*WAPT wapt-bounces@lists.tranquil.it *De la part de* Alexis Boulet *Envoyé :* jeudi 21 mars 2019 12:57 *À :* wapt@lists.tranquil.it *Objet :* Re: [Wapt] cacher des paquets
Bonjour,
je profite de la question de cacher les paquets, également.. Par exemple, est-il possible de cacher les paquets "à licence" ?
Par exemple : Je déploie, acrobatPro (avec licence) sur des postes mais je ne souhaite pas que le paquet soit visible/accessibles par les autres postes (par exemple avec localhost:8088/list). Si le met à jour mon paquet acrobatPro, il faut également que le paquet se mette à jour automatiquement sur les postes concernés par le paquet.
Autre demande, je souhaite partager mon dépôt de paquets avec un collègue dans une autre structure, mais le souhaite pas que ce même collègue puisse voir mes paquets à licence type acrobatPro, cela est-il possible ?
Merci d'avance,
Cordialement,
Alexis
Le 20/03/2019 à 13:02, sainthilairederiez mairie a écrit :
Bonjour, Je connais 2 moyens : - mettre par exemple "dev" dans la section maturity du fichier de control du paquet concerné : celui-ci ne sera vu que par les clients ayant dans le champ maturities "dev" de leur wapt-get.ini. fichier control champ "maturity" : https://www.wapt.fr/fr/doc/wapt-create-packages/wapt-package-structure/index.html fichier wapt-get.ini champ "maturities" : https://www.wapt.fr/fr/doc/wapt-configuration/ini-file/wapt-get.ini.html - ou à l'ancienne, vous ajoutez un répertoire "dev" dans le www de votre serveur wapt et vous faite pointer le repo_url de vos postes de dev vers celui-ci. Sébastien. Le mer. 20 mars 2019 à 12:07, Patrick BERTHELOT <patrick.berthelot@ipht.fr <mailto:patrick.berthelot@ipht.fr>> a écrit : Bonjour, Existe-t-il un moyen de « cacher » un paquet afin qu’il ne soit pas visible de tous les utilisateurs et pas visible non plus dans l’interface localhost:8088/list mais que en sachant le nom exacte il soit tout de même possible de l’installer, cela serait pratique lors du développement d’un paquet ou pour les paquets avec dépendance, pour la copie de fichiers avant l’installation par exemple, le paquet « copy de fichiers » n’a pas besoin d’être visible, puisque inutile, voir « dangereux » tout seul. Merci pour votre aide Cordialement Patrick _______________________________________________ WAPT mailing list WAPT@lists.tranquil.it <mailto:WAPT@lists.tranquil.it> http://lists.tranquil.it/listinfo/wapt _______________________________________________ WAPT mailing list WAPT@lists.tranquil.it <mailto:WAPT@lists.tranquil.it> http://lists.tranquil.it/listinfo/wapt
--
mbr
*Alexis Boulet* Assistant Ingénieur Service Informatique Tél. +33 2 32 95 36 32
coria
*UMR 6614 CORIA* Université de Rouen Site Universitaire du Madrillet - BP 12 76801 Saint Etienne du Rouvray cedex Tél. +33 2 32 95 36 00 - Fax +33 2 32 91 04 85 www.coria.fr http://www.coria.fr
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
Le 25/03/2019 à 08:36, Alexis Boulet a écrit :
Merci Simon pour votre réponse,
En effet, je vais commencer à m'intéresser à la version entreprise dans ce cas :)
Cependant, je n'ai aucune licence en clair à proprement parler dans mes paquets. En prenant l'exemple de AcrobatPro, la licence est intégrée au MSI d’installation (CF adobe customisation Wizard). Ce qui signifie, qu'un utilisateur ayant accès au package ne verra pas la licence en clair
mais pourra utiliser l'installeur, contenant la licence. C'est pour cela que je parlais de cacher totalement un paquet...
Autre méthode (qui reviens au même du coup) chiffrer le fichiers avec un clé symétrique, puis chiffrer cette clé avec la méthode indiqué dans la doc.
Dans l'installation donc: il faut récupérer la clé avec la méthode de la doc, puis déchiffrer le fichier.
Simon
Alexis
Le 23/03/2019 à 12:27, Simon Fonteneau a écrit :
Pour masquer des mise à jour dans localhost:8088/list en fonction de l'utilisateur connectée c'est uniquement en version entreprise:
https://www.youtube.com/watch?v=znTBJv3vDKM
Attention par défaut les administrateurs peuvent voir tous les logiciels (ils sont de toute façon administrateur du poste ils fonts ce qu'ils veulent...)
/Autre demande, je souhaite partager mon dépôt de paquets avec un collègue dans une autre structure, mais le souhaite pas que ce même collègue puisse voir mes paquets à licence type acrobatPro, cela est-il possible ?/
Plus globalement pour les logiciels a licences il faut voir les chose autrement.
La licence acrobatPro ne doit pas être en clair dans le paquet le paquet. Je vous conseille donc de lire ceci:
https://www.wapt.fr/fr/doc/wapt-create-packages/secret-data/encrypt-paquet.h...
Simon
Le 22/03/2019 à 12:13, Patrick BERTHELOT a écrit :
Boulet Alexis
Bonjour,
Je viens de faire quelques tests en utilisant le paramètre « Maturity », ça permet de cacher un paquet aux clients qui ne l’ont pas déclarer dans wapt-get.ini, on peut tout de même « pousser » le paquet depuis la console, j’ai par contre un problème quand j’ai une dépendance avec un paquet cache ?
Je pense que le fonctionnement doit être identique avec plusieurs dépôt ?
Cordialement Patrick
*De :*WAPT wapt-bounces@lists.tranquil.it *De la part de* Alexis Boulet *Envoyé :* jeudi 21 mars 2019 12:57 *À :* wapt@lists.tranquil.it *Objet :* Re: [Wapt] cacher des paquets
Bonjour,
je profite de la question de cacher les paquets, également.. Par exemple, est-il possible de cacher les paquets "à licence" ?
Par exemple : Je déploie, acrobatPro (avec licence) sur des postes mais je ne souhaite pas que le paquet soit visible/accessibles par les autres postes (par exemple avec localhost:8088/list). Si le met à jour mon paquet acrobatPro, il faut également que le paquet se mette à jour automatiquement sur les postes concernés par le paquet.
Autre demande, je souhaite partager mon dépôt de paquets avec un collègue dans une autre structure, mais le souhaite pas que ce même collègue puisse voir mes paquets à licence type acrobatPro, cela est-il possible ?
Merci d'avance,
Cordialement,
Alexis
Le 20/03/2019 à 13:02, sainthilairederiez mairie a écrit :
Bonjour, Je connais 2 moyens : - mettre par exemple "dev" dans la section maturity du fichier de control du paquet concerné : celui-ci ne sera vu que par les clients ayant dans le champ maturities "dev" de leur wapt-get.ini. fichier control champ "maturity" : https://www.wapt.fr/fr/doc/wapt-create-packages/wapt-package-structure/index.html fichier wapt-get.ini champ "maturities" : https://www.wapt.fr/fr/doc/wapt-configuration/ini-file/wapt-get.ini.html - ou à l'ancienne, vous ajoutez un répertoire "dev" dans le www de votre serveur wapt et vous faite pointer le repo_url de vos postes de dev vers celui-ci. Sébastien. Le mer. 20 mars 2019 à 12:07, Patrick BERTHELOT <patrick.berthelot@ipht.fr <mailto:patrick.berthelot@ipht.fr>> a écrit : Bonjour, Existe-t-il un moyen de « cacher » un paquet afin qu’il ne soit pas visible de tous les utilisateurs et pas visible non plus dans l’interface localhost:8088/list mais que en sachant le nom exacte il soit tout de même possible de l’installer, cela serait pratique lors du développement d’un paquet ou pour les paquets avec dépendance, pour la copie de fichiers avant l’installation par exemple, le paquet « copy de fichiers » n’a pas besoin d’être visible, puisque inutile, voir « dangereux » tout seul. Merci pour votre aide Cordialement Patrick _______________________________________________ WAPT mailing list WAPT@lists.tranquil.it <mailto:WAPT@lists.tranquil.it> http://lists.tranquil.it/listinfo/wapt _______________________________________________ WAPT mailing list WAPT@lists.tranquil.it <mailto:WAPT@lists.tranquil.it> http://lists.tranquil.it/listinfo/wapt
--
mbr
*Alexis Boulet* Assistant Ingénieur Service Informatique Tél. +33 2 32 95 36 32
coria
*UMR 6614 CORIA* Université de Rouen Site Universitaire du Madrillet - BP 12 76801 Saint Etienne du Rouvray cedex Tél. +33 2 32 95 36 00 - Fax +33 2 32 91 04 85 www.coria.fr http://www.coria.fr
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt
-- Boulet Alexis mbr *Alexis Boulet* Assistant Ingénieur Service Informatique Tél. +33 2 32 95 36 32 coria *UMR 6614 CORIA* Université de Rouen Site Universitaire du Madrillet - BP 12 76801 Saint Etienne du Rouvray cedex Tél. +33 2 32 95 36 00 - Fax +33 2 32 91 04 85 www.coria.fr http://www.coria.fr
WAPT mailing list WAPT@lists.tranquil.it http://lists.tranquil.it/listinfo/wapt